GE Fanuc IC694DNM200-BB DeviceNet mester bővítőkártya

Product Description

The IC694DNM200 (including revision IC694DNM200-BB) is a high-performance DeviceNet Master Module engineered for the GE Fanuc PACSystems RX3i and Series 90-30 PLC platforms. This module serves as the primary communications hub for integrating DeviceNet-enabled field hardware—such as variable frequency drives (VFDs), smart sensors, and motor starters—directly into the controller’s logic. By operating as a master node, it manages data polling, cyclic updates, and critical diagnostics for a network of up to 63 slave devices.

This module is designed for high-density industrial applications, supporting up to 255 bytes of input and 255 bytes of output data per slave device. The IC694DNM200 is highly versatile; while its primary role is a Master, it can be software-configured to operate as a Slave to another master on the same network. Integration is performed exclusively through Proficy Machine Edition, ensuring modern software compatibility and advanced diagnostic capabilities. The hardware also features a dedicated RS-232 service port for localized troubleshooting and configuration.

Technical Specifications

• Model Designation: IC694DNM200 / IC694DNM200-BB

• Manufacturer: GE Fanuc (Emerson Automation)

• Protocol: DeviceNet (Master or Slave configuration)

• Maximum Slaves: Supports up to 63 DeviceNet slave devices

• Data Capacity: 255 Bytes Input / 255 Bytes Output per slave

• Supported Baud Rates: 125 kbps, 250 kbps, 500 kbps (Auto/Manual)

• Onboard Interfaces: 1 DeviceNet Terminal Port, 1 RS-232 Service Port

• Internal Power Draw: 450 mA @ 5 VDC

• Backplane Slot: Single slot occupancy in RX3i or 90-30 Universal Base

• CPU Requirements: RX3i CPU310 (v3.5+) or Series 90-30 (firmware v8.0+)

• Operating Temperature: -20 °C to +60 °C

• Storage Temperature: -40 °C to +85 °C

• Weight: 0.40 lbs (0.18 kg)

• Compliance: ODVA DeviceNet Standard, IEC 61326-1 EMC

Application & Network Strategy

The IC694DNM200 is typically utilized in manufacturing and process control environments where decentralized I/O is required. It allows the PACSystems RX3i to act as the central supervisor for a complex trunk-line/drop-line network. Its ability to handle large data packets per node makes it particularly suitable for managing smart instrumentation that requires more than just simple bit-level status updates.

Frequently Asked Questions

Is the IC694DNM200 compatible with older Series 90-30 CPUs?The IC694DNM200 is compatible with most 90-30 CPUs, provided they are running firmware version 8.0 or higher. However, it is not supported by the IC693CPU321 or CPU340.

Which software is required for configuration?Configuration and network mapping must be performed using Proficy Machine Edition (PME). Legacy tools like VersaPro or LogicMaster 90 do not support the advanced features of the IC694DNM200.