{"product_id":"12p0631x012-emerson-deltav-datasheet-technical-manual","title":"12P0631X012 Emerson DeltaV Datasheet \u0026 Technical Manual","description":"\u003ch2\u003eEmerson 12P0631X012 DeltaV Analog Input Module\u003c\/h2\u003e\n\u003cp\u003eConfigured for Specific Technical Task in System\/Network Name, the \u003cstrong\u003eEmerson 12P0631X012\u003c\/strong\u003e (\u003cstrong\u003eKJ3001X1-BB1\u003c\/strong\u003e Analog Input Module) provides direct physical\/electrical execution. It interfaces directly with field transmitters and sensors, converting 4-20 mA analog current loops into digital data over the local system backplane for process monitoring and algorithmic control execution.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eKJ3001X1-BB1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eEmerson\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.18 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e51 mm x 102 mm x 102 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e0 to +60 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003eLocalBus: 12 VDC at 150 mA; Bussed Field Power: 12 VDC at 300 mA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNumber of Channels\u003c\/td\u003e\n\u003ctd\u003e8 analog input channels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal Range\u003c\/td\u003e\n\u003ctd\u003e4-20 mA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eResolution\u003c\/td\u003e\n\u003ctd\u003e12-bit A\/D conversion\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eField Circuit Rating\u003c\/td\u003e\n\u003ctd\u003e24 VDC at 32 mA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRelative Humidity\u003c\/td\u003e\n\u003ctd\u003e5% to 95% non-condensing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShock Resistance\u003c\/td\u003e\n\u003ctd\u003e10 g half-sine wave for 11 ms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVibration Resistance\u003c\/td\u003e\n\u003ctd\u003e1 mm peak-to-peak (2 to 13.2 Hz), 0.7 g (13.2 to 150 Hz)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCertifications\u003c\/td\u003e\n\u003ctd\u003eCE, UL, ATEX, IECEx (Zone 2 \/ Class I Div. 2)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eProcess Control and DCS Instrumentation Attributes\u003c\/h3\u003e\n\u003cp\u003eThe hardware utilizes a dedicated 4-20 mA HART loop protocol architecture across all 8 available channels to guarantee signal integrity between field devices and the digital processing core. High-performance channel-to-channel isolation circuits prevent ground loops and common-mode voltage spikes from damaging internal electronics. Embedded cold junction compensation (CJC) algorithms maintain high conversion precision across the entire operating thermal profile. This module interacts natively with the DeltaV LocalBus via parallel cord bus extension mechanisms, minimizing communication latency and stabilizing execution cycles.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: What is the backplane power Draw required for the KJ3001X1-BB1 module?\u003c\/p\u003e\n\u003cp\u003eA: The module draws 150 mA maximum from the LocalBus at a nominal voltage of 12 VDC, while the bussed field power demands up to 300 mA at 12 VDC.\u003c\/p\u003e\n\u003cp\u003eQ: How does the module handle transient signal noise on the 4-20 mA inputs?\u003c\/p\u003e\n\u003cp\u003eA: The hardware employs internal filtering alongside its 12-bit A\/D conversion sub-assembly, operating with channel-to-channel isolation boundaries to filter industrial high-frequency electromagnetic interference before data encoding.\u003c\/p\u003e\n\u003cp\u003eQ: Can this module be swapped while the backplane is energized?\u003c\/p\u003e\n\u003cp\u003eA: Hot-swapping must be executed in accordance with DeltaV system limits and hazardous location conditions. Removal or insertion under power is restricted if explosive atmospheres are present, despite its Zone 2\/Class I Div. 2 certification.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting Alignment\u003c\/strong\u003e: Secure the module firmly onto the designated DeltaV carrier rack slot. Ensure the top and bottom interlocking clips engagement mechanisms click into place to verify a vibration-resistant physical bond and proper backplane connector alignment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShielding and Grounding\u003c\/strong\u003e: All 4-20 mA field wiring must use twisted-pair shielded cables. Ground the cable shields at a single point, preferably at the instrument enclosure or the Marshalling panel ground bar, to prevent ground loop currents from degrading the 12-bit analog-to-digital resolution.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConduit Separation\u003c\/strong\u003e: Maintain physical separation between low-voltage analog signal lines and high-voltage AC power distribution conduits to mitigate signal crosstalk and induced EMI.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHazardous Area Compliance\u003c\/strong\u003e: For installations inside Zone 2 or Class I Division 2 environments, verify that all external field circuit connections conform to the rated 24 VDC at 32 mA limits and that no live wiring modifications are attempted without testing the atmosphere for flammable gases.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GE Fanuc","offers":[{"title":"Default Title","offer_id":43840460816483,"sku":"12P0631X012","price":370.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0583\/5246\/8067\/files\/129_e62932bf-44ec-4263-a3b7-6ee4c6b515f7.jpg?v=1763349536","url":"https:\/\/www.autocontrolglobal.com\/products\/12p0631x012-emerson-deltav-datasheet-technical-manual","provider":"AutoControl Global","version":"1.0","type":"link"}