330104-00-24-05-02-00 Bently Nevada M10x1 Vibration Sensor

Product Overview

The 330104-00-24-05-02-00 serves as a core component of the Bently Nevada 3300 XL Transducer System. Utilizing a metric M10 x 1 threaded housing, this probe fits seamlessly into machinery engineered with metric mounting specifications. It detects the distance between the probe tip and the target shaft without physical contact, ensuring zero mechanical wear and long-term signal stability. We supply this product as 100% Brand New, factory-sealed, and original, maintaining the strict calibration integrity required for API 670 machinery protection.

Part Number Breakdown: 330104-00-24-05-02-00

• 330104: 3300 XL 8 mm Proximity Probe, M10 x 1 thread.

• -00: Unthreaded Length: 0.0 mm.

• -24: Overall Case Length: 2.4 inches (approx. 61 mm).

• -05: Total Length: 0.5 meters (1.6 feet).

• -02: Connector and Cable Option: Miniature coaxial ClickLoc™ connector, standard cable.

• -00: Agency Approval: Standard (No specific regional marking).

Technical Specifications

Engineering Advantages

The 330104-00-24-05-02-00 utilizes advanced material science to overcome the most common failure points in industrial sensing:

• TipLoc™ Molecular Bonding: The PPS probe tip bonds chemically to the probe body. This prevents the tip from detaching and falling into the machinery—a failure common in low-quality aftermarket sensors.

• ClickLoc™ Interconnect: The gold-plated ClickLoc™ connector employs a positive-locking mechanism. This prevents the cable from vibrating loose and eliminates signal "spikes" caused by poor electrical contact.

• Metric Housing Precision: The M10 x 1 thread design allows for precise depth adjustment in metric-tapped bearing housings, ensuring the sensor sits perfectly within its linear range.

• High-Pressure Resilience: The stainless steel housing and specialized internal seals withstand high-pressure oil environments within turbine and compressor bearing pedestals.

FAQs

Is this probe compatible with standard 3300 XL Proximitors?

Yes. The 330104 probe interfaces directly with any standard 3300 XL Proximitor sensor. However, you must ensure the total system length (Probe + Extension Cable) matches the Proximitor’s calibration (e.g., a 5m or 9m system).

What extension cable do I need for this 0.5m probe?

To reach a standard 5.0-meter system length, pair this 0.5-meter probe with a 4.5-meter 3300 XL extension cable. For a 9.0-meter system, use an 8.5-meter extension cable.

How do I adjust the gap for an 8mm probe?

Rotate the probe in its threaded mount while monitoring the DC voltage output at the Proximitor. For most 3300 XL systems, setting the gap to reach -10.00 VDC places the probe at the center of its 80-mil linear range.

Can this probe withstand high temperatures?

While calibrated for maximum precision between +18°C and +27°C, the probe operates reliably across a much wider industrial temperature range. Refer to the 3300 XL series datasheet for specific mechanical limits in extreme heat applications.