330908 Bently Nevada 3300 XL NSV Eddy Current Sensor
Manufacturer: GE Fanuc
-
Part Number: IS200STAIH2AAA
Condition：New with Original Package
Product Type: Analog Input Modules
-
Country of Origin: USA
Payment:T/T, Western Union
Shipping port: Xiamen
Warranty: 12 months
GE IS200STAIH2AAA Mark VIe Series
Configured for signal termination and interface conditioning in Mark VI/Mark VIe control system networks, the GE IS200STAIH2AAA (IS200STAIH2 Analog Input Terminal Board) provides direct physical/electrical execution. The module terminates field analog input signals, including 4-20 mA current loops, plus minus 5 VDC, and plus minus 10 VDC voltage inputs, transmitting the conditioned data directly to the respective I/O packs.
Suffix Breakdown & Model Matrix
The catalog number configuration follows a defined component structural matrix:
- IS200: Standard internal printed circuit board assembly identifier.
- STAI: Simple Analog Input Terminal Board functional module group designation.
- H2: Hardware group variant matching specific terminal configurations and channel density limits.
- AAA: Artwork, assembly, and functional revision level matching compatibility baselines.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | IS200STAIH2AAA |
| Brand | GE |
| Origin | United States of America (USA) |
| Weight | 0.8 kg |
| Dimensions | 33 cm x 17.8 cm x 5 cm |
| Operating Temp | -30 to 65 deg C |
| Power Consumption | 24 VDC nominal |
| Input Channels | 16 channels |
| Signal Type | 4-20 mA / plus minus 5 VDC / plus minus 10 VDC |
| Burden Resistor | 250 Ohm for current inputs |
| Wire Gauge | 12 to 24 AWG |
| Torque Rating | 0.5 Nm |
| Isolation | Channel-to-system and channel-to-channel isolation |
I/O Density Scaling & Deterministic Networks
The IS200STAIH2AAA establishes a high-density passive architecture optimizing signal distribution across 16 parallel input channels. By implementing fixed 250 Ohm burden resistors, the assembly translates incoming current variables into local voltage equivalents for fast digitization by adjacent I/O processing packs. System integration relies on direct connection protocols to the active controller platform via deterministic internal backplane communication structures, mitigating propagation delays and securing precise signal sampling rates without software-driven translation layers.
Frequently Asked Questions
Q: Does the IS200STAIH2AAA board contain active firmware that requires flash programming?
A: No. The IS200STAIH2AAA is a passive analog input terminal board containing termination blocks, low-pass analog filtering components, and internal routing traces. It does not contain programmable microcontrollers or onboard firmware flash matrices; configuration parameters are managed solely inside the attached digital I/O pack.
Q: How does the module handle the common-mode voltage present across independent field transmitters?
A: Galvanic and electrical safety boundaries are sustained via channel-to-system and channel-to-channel isolation networks. The board infrastructure rejects common-mode noise voltages through hardware-based low-pass analog filtering, preventing crosstalk and shielding the primary controller networks from field-induced electrical surges.
Field Installation Guidelines
- Mounting Infrastructure: Install the board onto the designated DIN rail or control rack frame inside the enclosure panel, ensuring all mechanical latching mechanisms are engaged.
- Wiring Conductor Specifications: Use field wiring cables within the certified 12 to 24 AWG dimension range. Tighten all terminal screws strictly to the specified 0.5 Nm torque specification to eliminate high-resistance contact vectors.
- Shield Grounding Matrix: Strip external analog loop cables at the designated entry point and clamp the overall shield braids securely to the primary instrument chassis ground bus bar to prevent high-frequency noise injection.