4 Channel Analog Output Module | GE IC695ALG704
Manufacturer: GE Fanuc
-
Part Number: IC695ALG704
Condition：New with Original Package
Product Type: Analog Output Modules
-
Country of Origin: USA
Payment:T/T, Western Union
Shipping port: Xiamen
Warranty: 12 months
GE Fanuc IC695ALG704 PACSystems RX3i Analog Output Module
Configured for precise analog signal execution in PACSystems RX3i backplane architectures, the GE Fanuc IC695ALG704 (IC695ALG704 Analog Output Module) provides direct physical/electrical execution for up to 4 independently configurable voltage and current loops.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | IC695ALG704 |
| Brand | GE Fanuc / Emerson |
| Origin | USA |
| Weight | 0.3 - 1.55 kg |
| Dimensions | 34 mm x 145 mm x 140 mm |
| Operating Temp | 0 to 60 deg C |
| Storage Temp | -40 to 85 deg C |
| Power Consumption | 375 mA @ 3.3 VDC; 160 mA @ 24 VDC isolated |
| Output Channels | 4 isolated configurable analog channels |
| Output Voltage Ranges | 0 to 10 V, +/-10 V, 0 to 5 V, +/-5 V |
| Output Current Ranges | 0 to 20 mA, 4 to 20 mA |
| Resolution | 16-bit DAC conversion |
| Relative Humidity | 5% to 95%, non-condensing |
| Hazardous Location Rating | Zone 2 certified |
Backplane Bus Communication Velocity and Firmware Compatibility
The module resides in a single slot of the RX3i system rack, interfacing across the high-speed PCI backplane to maintain deterministic update cycles. Internal microprocessor firmware flash routines execute continuous background channel diagnostics, verifying loop continuity and backplane bus communication state without affecting execution speed. Channel parameters, including signal range selection, zero offset, and engineering scaling, configure dynamically through PACSystems Machine Edition without hardware jumper adjustments.
Frequently Asked Questions
Q: Does the IC695ALG704 module support channel-independent signal range selection?
A: Yes, each of the 4 output channels configures independently for specific current or voltage operating ranges via controller configuration software.
Q: How does the module handle backplane power delivery across different voltage rails?
A: The hardware draws 375 mA from the 3.3 VDC logic rail and 160 mA from the isolated 24 VDC bus rail provided by the RX3i backplane power supply.
Q: What physical indicators show real-time channel and module status on the front panel?
A: Dedicated LED indicators display real-time operational status for the overall module along with individual output channel fault states.
Field Installation Guidelines
Ensure rack power supplies are completely de-energized prior to inserting or removing the module from the RX3i backplane slot. Slide the IC695ALG704 firmly along the slot guide rails until the backplane connectors lock completely into the baseboard rack receptacle. Route all field output loop wiring through dedicated shielded twisted-pair cables, ensuring physical separation from high-voltage AC conductors or variable frequency drive power cabling. Connect cable shield drain wires directly to the cabinet ground bus bar at a single point to prevent ground loops and minimize high-frequency noise interference.