{"product_id":"51199581-200-honeywell-tdc-3000-experion-pks-datasheet-technical-manual","title":"51199581-200 Honeywell TDC 3000\/Experion PKS Datasheet \u0026 Technical Manual","description":"\u003ch2\u003eHoneywell 51199581-200 WKS2 Workstation Cable Assembly\u003c\/h2\u003e\n\u003cp\u003eConfigured for communication and I\/O link data transmission in TDC 3000, Experion PKS, and TPS architectures, the \u003cstrong\u003eHoneywell 51199581-200\u003c\/strong\u003e (\u003cstrong\u003e51199581\u003c\/strong\u003e Communication Cable Assembly) provides direct physical\/electrical execution. The hardware establishes a point-to-point interface between processing nodes and Field Termination Assemblies, executing low-latency bit-stream propagation over high-frequency differential signal lines. Its layered mechanical shielding isolates weak data lines from structural transients and electrical cross-talk without compromising signal attenuation across the full length of the physical link.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e51199581-200\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eHoneywell\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.18 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003eLength: 2 meters\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e-20 to 70 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003ePassive hardware (No external power required)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable Type\u003c\/td\u003e\n\u003ctd\u003eShielded Twisted Pair (STP)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnector Type\u003c\/td\u003e\n\u003ctd\u003eDual-end factory-molded industrial connectors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShielding Structure\u003c\/td\u003e\n\u003ctd\u003eMulti-layer aluminum foil and tinned copper braided shield\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eJacket Material\u003c\/td\u003e\n\u003ctd\u003eIndustrial-grade flame-retardant PVC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage Rating\u003c\/td\u003e\n\u003ctd\u003e30 V AC\/DC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlame Retardancy\u003c\/td\u003e\n\u003ctd\u003eUL 1581 VW-1 compliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSystem Compatibility\u003c\/td\u003e\n\u003ctd\u003eTDC 3000, Experion PKS, TPS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eChannel-to-Channel Isolation and Loop Continuity\u003c\/h3\u003e\n\u003cp\u003eThe 51199581-200 utilizes a multi-layered foil and tinned copper braided shielding grid to ensure stringent channel-to-channel isolation and comprehensive high-frequency noise rejection across the communication path. The twin-conductor twisted-pair internal configuration eliminates localized differential-mode noise coupling and common-mode current loops from adjacent high-voltage power conduits. This architecture maintains strict loop impedance balancing and controls signal propagation delays across the 4-20 mA HART loop protocol layer, eliminating signal distortion and maintaining strict diagnostic integrity for downstream process automation variables.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Does the 51199581-200 cable assembly support hot-swapping during active system operations?\u003c\/p\u003e\n\u003cp\u003eA: Yes. Because this is a passive communication cable assembly handling low-voltage signals, it can be disconnected and replaced without disrupting the primary system power or causing backplane logic faults, provided the associated loop control software allows transient open-circuit states.\u003c\/p\u003e\n\u003cp\u003eQ: What is the mechanical bend radius limitation for this cable inside control panels?\u003c\/p\u003e\n\u003cp\u003eA: To prevent attenuation degradation, internal conductor fracturing, and damage to the multi-layer foil shielding, the cable assembly must maintain a minimum static bend radius of 10 times the outer cable diameter during installation.\u003c\/p\u003e\n\u003cp\u003eQ: How does the cable handle ground loop currents between interconnected equipment?\u003c\/p\u003e\n\u003cp\u003eA: The cable relies on proper termination of its tinned copper braided shield at a single master ground point (typically the cabinet instrument ground bar) to drain induced EMI\/RFI currents while preventing the formation of destructive ground loops between processing racks.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eVerify that the factory-molded connectors are clear of particulate matter, moisture, and corrosive atmospheric deposits before insertion into the module or field termination assembly sockets.\u003c\/li\u003e\n\u003cli\u003eRoute the communication cable assembly through dedicated low-voltage instrument raceways, ensuring complete physical separation from three-phase AC power cables and variable frequency drive output conduits to prevent electromagnetic cross-talk.\u003c\/li\u003e\n\u003cli\u003eSecure the cable structure with industrial cable ties at regular 300 mm intervals to distribute physical stress, avoiding over-tightening that could compress the flame-retardant PVC jacket and alter the structural impedance of the internal twisted pairs.\u003c\/li\u003e\n\u003cli\u003eEnsure the integrated locking mechanisms on both molded terminal plugs are fully engaged and locked to maintain mechanical connection stability in high-vibration structural environments.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Honeywell","offers":[{"title":"Default Title","offer_id":43869108797539,"sku":"51199581-200","price":320.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0583\/5246\/8067\/files\/400_6cd8dfe8-68ff-4884-967a-0847b4dd8ccf.jpg?v=1764749077","url":"https:\/\/www.autocontrolglobal.com\/products\/51199581-200-honeywell-tdc-3000-experion-pks-datasheet-technical-manual","provider":"AutoControl Global","version":"1.0","type":"link"}