51202938-010 Honeywell TDC 3000 High-Level Analog Input Cable
Manufacturer: HONEYWELL
-
Part Number: 51202938-010
Condition：New with Original Package
Product Type: Analog Input Modules
-
Country of Origin: Sweden
Payment:T/T, Western Union
Shipping port: Xiamen
Warranty: 12 months
Honeywell 51202938-010 FTA Interconnection Cable
The Honeywell 51202938-010 serves as the primary 51202938 FTA Interconnection Cable utilized to execute high-level analog input acquisition across Honeywell TDC 3000 / TPS / Experion PKS platforms. The physical assembly routes 4-20 mA DC or 1-5 VDC analog loops between Field Termination Assemblies (FTAs) and processing chassis components to maintain deterministic process variables.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | 51202938-010 |
| Brand | Honeywell |
| Origin | USA |
| Weight | 0.25 kg |
| Dimensions | 2.9 x 31.8 x 27.8 cm |
| Operating Temp | -20 deg C to +70 deg C |
| Storage Temp | -40 deg C to +85 deg C |
| Power Supply | 24 VDC via system backplane |
| Input Signal Range | 4-20 mA DC or 1-5 VDC |
| Number of Channels | 8 or 16 (configuration dependent) |
| Accuracy | +/-0.1% of span (typical) |
| Isolation | Channel-to-channel and system galvanic isolation |
| Humidity | 5% - 95% non-condensing |
| Certifications | CE, UL, CSA |
Process Control & Network Integration Profiles
The hardware line supports continuous deployment of the 4-20 mA HART loop protocol by passing both secondary digital telemetry and primary analog signals without impedance distortion. System layouts leverage the integrated channel-to-channel isolation and galvanic protection profiles to suppress common-mode electrical transients across extended distances. This structural design mitigates thermal shifts and minimizes resistance deviations, preventing baseline calibration degradation in cold junction compensation (CJC) circuits operating on adjacent low-level termination paths.
Frequently Asked Questions
Q: What specific analog voltage and current ranges can this interconnect assembly accommodate?
A: The configuration processes standard industrial high-level analog signals rated at either 4-20 mA DC loop currents or 1-5 VDC potential differences.
Q: How does the cable interface handle high-voltage spikes originating from field devices?
A: The associated termination architecture incorporates channel-to-channel and system galvanic isolation properties that clamp electrical noise and isolate destructive voltage transients before they reach the main controller backplane.
Field Installation Guidelines
Route the connection assembly through designated industrial wire trays, ensuring the layout does not exceed the minimum physical bend radius specified for heavy-duty multi-conductor instrumentation cables. Align the standard interface connectors with the corresponding pins on the Field Termination Assembly and control modules, applying steady mechanical force until the integrated retention clips lock completely into place.
Maintain physical isolation inside the wire management system between these low-voltage analog paths and high-current AC power cables to prevent inductive cross-talk. Verify that the ambient operating environment remains within the standard limits of -20 deg C to +70 deg C before conducting full loop checks on the associated 24 VDC backplane supply lines.