{"product_id":"51305759-100-honeywell-tdc-3000-oep-ikb-interface-module","title":"51305759-100 Honeywell TDC 3000 OEP\/IKB Interface Module","description":"\u003ch2\u003eHoneywell 51305759-100 OEP\/IKB Interface Module\u003c\/h2\u003e\n\u003cp\u003eConfigured for Specific Technical Task in System\/Network Name, the \u003cstrong\u003eHoneywell 51305759-100\u003c\/strong\u003e (\u003cstrong\u003e51305759\u003c\/strong\u003e OEP\/IKB Interface Module) provides direct physical\/electrical execution. The hardware operates as a dedicated bridge executing data transfer between the OEP operator interface bus and the IKB engineering interface. It maintains continuous communication uptime across legacy architectures through a direct backplane power interface.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e51305759-100\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eHoneywell\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.54 kg (1.2 lbs)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e165 x 107 x 58 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e-20 to +60 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003ePowered via 24 VDC system backplane\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eOEP\/IKB Interface Module (PWA Assembly)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCategory\u003c\/td\u003e\n\u003ctd\u003ePLC Add-On Board\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput Interface\u003c\/td\u003e\n\u003ctd\u003eOEP system bus\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput Interface\u003c\/td\u003e\n\u003ctd\u003eIKB engineering interface\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIngress Protection\u003c\/td\u003e\n\u003ctd\u003eIP54\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCertifications\u003c\/td\u003e\n\u003ctd\u003eCE, UL, CSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eProcess Control \u0026amp; DCS Instrumentation\u003c\/h3\u003e\n\u003cp\u003eThe module incorporates physical channel-to-channel isolation parameters to isolate the OEP operator system bus from the IKB engineering side, preventing ground loop currents from degrading data integrity. It works within the deterministic bus structures of legacy control nodes, processing differential signal levels to maintain low-latency transmission. The PWA architecture contains dedicated filtering circuitry to suppress high-frequency electromagnetic interference across the backplane connection points, stabilizing data frames during simultaneous console read\/write operations.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Can this module be hot-swapped while the TDC 3000 backplane is energized?\u003c\/p\u003e\n\u003cp\u003eA: No. Power down the specific rack slot or node segment before removing or inserting the module to prevent electrical arcing and corrupted data frames on the system bus.\u003c\/p\u003e\n\u003cp\u003eQ: How is the I\/O mapping verified after installing a replacement board?\u003c\/p\u003e\n\u003cp\u003eA: Although the system configuration layer detects the hardware automatically upon boot, engineers must run the native diagnostic utility from the engineering workstation to verify address line mapping and signal continuity.\u003c\/p\u003e\n\u003cp\u003eQ: Is this assembly compatible with standard Experion PKS controllers?\u003c\/p\u003e\n\u003cp\u003eA: The module is engineered for native TDC 3000 and HPM environments. Direct implementation in Experion PKS requires an intermediate legacy migration gateway or a hybrid UCN\/LCN bridge.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cp\u003eEnsure the node chassis is completely de-energized prior to hardware insertion. Align the PWA assembly card edges precisely with the designated enclosure guide rails to prevent pin misalignment on the backplane connector. Slide the unit firmly until the rear connector seats completely into the backplane matrix.\u003c\/p\u003e\n\u003cp\u003eSecure all integrated retention screws to establish a continuous chassis ground path. Implement standard ESD grounding wrist straps during handling to protect internal CMOS logic components from static discharge. Maintain separation between input OEP bus cabling and high-voltage AC power lines within the conduit to limit inductive noise coupling.\u003c\/p\u003e","brand":"HONEYWELL","offers":[{"title":"Default Title","offer_id":43867042545763,"sku":"51305759-100","price":676.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0583\/5246\/8067\/files\/349_dda60afe-ac17-4c24-b35c-75f8bacf1b37.jpg?v=1764663705","url":"https:\/\/www.autocontrolglobal.com\/products\/51305759-100-honeywell-tdc-3000-oep-ikb-interface-module","provider":"AutoControl Global","version":"1.0","type":"link"}