63-Slave DeviceNet Master | GE Fanuc 90-30 IC693DNM200
Manufacturer: GE Fanuc
-
Part Number: IC693DNM200
Condition：New with Original Package
Product Type: PLC Processors
-
Country of Origin: USA
Payment:T/T, Western Union
Shipping port: Xiamen
Warranty: 12 months
Product Overview
The GE Fanuc IC693DNM200 acts as the primary DeviceNet Master interface for the Series 90-30 and PACSystems RX3i PLC platforms. This 100% Brand New original module enables the controller to communicate with and manage up to 63 DeviceNet slave devices, such as motor starters, variable frequency drives (VFDs), and remote I/O blocks. By occupying a single slot in the PLC backplane, the IC693DNM200 facilitates high-speed, deterministic data exchange across industrial fieldbus networks, supporting complex automation architectures that require high-throughput I/O connectivity.
Technical Specifications
| Feature | Technical Details |
| Model Number | IC693DNM200 / IC693DNM200-BD |
| Protocol | DeviceNet Master |
| Slave Capacity | Up to 63 DeviceNet Slaves |
| Communication Speeds | 125K, 250K, and 500K Baud |
| I/O Connections | 2 I/O connections per slave |
| Data Transfer (per Slave) | 255 Input Bytes / 255 Output Bytes |
| Total Data Capacity | 3972 Input Bytes / 3972 Output Bytes |
| Interfaces | One (1) DeviceNet Terminal; One (1) Service Port |
| Operating Voltage | 12 to 24 VDC |
| Backplane Current | 450 mA @ 5 VDC (Typical) |
| Response Time | 0.5 ms maximum (ON/OFF) |
| Operating Temp | 0 to 60 °C (32 to 140 °F) |
Engineering Advantages
-
Massive Network Scalability: The IC693DNM200 handles up to 63 slaves and nearly 4KB of input/output data. This allows for the integration of large-scale distributed I/O systems and smart sensors without saturating the PLC's main backplane bandwidth.
-
Multi-Protocol I/O Support: The module supports Poll, Strobe, Cyclic, and Change-of-State (COS) I/O connections. This flexibility ensures compatibility with a vast range of third-party DeviceNet devices, allowing for optimized network traffic based on specific process requirements.
-
Deterministic Performance: A maximum response time of 0.5 milliseconds ensures high-speed discrete control. This low-latency processing prevents timing jitter in synchronized applications like material handling and automated assembly lines.
-
Built-in Service Interface: The dedicated service port simplifies network commissioning and maintenance. Engineers can monitor bus health and configure slave parameters directly through the module without interrupting the main PLC communication cycle.
-
Robust Electrical Protection: Designed for harsh factory floors, the module withstands inrush currents up to 5.4 Amps and operates within a wide storage temperature range of -40 to 85 °C, protecting the hardware during transport and downtime in extreme climates.
FAQs
-
In which slots can I install the IC693DNM200?
You can install this module in any available slot of a Series 90-30 or RX3i rack, except for slots 0 and 1, which are reserved for the Power Supply and CPU respectively.
-
Does this module require an external power supply?
Yes. The DeviceNet network itself requires a 12 to 24 VDC power supply to power the bus and transceiver circuits. The module draws its internal logic power (450mA) directly from the PLC backplane.
-
Can the IC693DNM200 work with PACSystems RX3i?
Yes. The IC693DNM200 maintains full compatibility with the PACSystems RX3i universal backplane, making it an ideal choice for legacy migrations or modernizing Series 90-30 systems to the RX3i platform.