6FC5372-0AA30-0AB0 840D Siemens sl NCU 720.3B PN Module
Manufacturer: Siemens
-
Part Number: 6FC5372-0AA30-0AB0
Condition：New with Original Package
Product Type: Numerical Control Units
-
Country of Origin: USA
Payment:T/T, Western Union
Shipping port: Xiamen
Warranty: 12 months
Siemens 6FC5372-0AA30-0AB0 SINUMERIK 840D sl Numerical Control Unit
The Siemens 6FC5372-0AA30-0AB0, also cataloged as the 6FC5372-0AA30-0AB0 Numerical Control Unit, operates as a dedicated hardware component for multi-axis motion control and PLC execution within SINUMERIK 840D sl platforms. Driven by an Intel Core 2 T7400 2.1 GHz processor, the module directly coordinates real-time interpolation trajectories while exchanging control data across internal backplane buses and integrated communication links.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | 6FC5372-0AA30-0AB0 |
| Brand | Siemens |
| Origin | Germany |
| Weight | 3.9 kg (8.60 lbs) |
| Dimensions | Standard SINUMERIK 840D sl NCU enclosure frame |
| Operating Temp | 0 to 55 deg C |
| Power Consumption | Backplane bus power supply (24 VDC nominal) |
| Core Processor | Intel Core 2 T7400 / 2.1 GHz |
| NC Memory | 3 MB |
| DRAM Memory | 1 GB |
| Non-Volatile Memory | 1 MB |
| Integrated PLC | S7-300 PLC 317-3 PN/DP (512 KB Work Memory) |
| Communication Interfaces | PROFINET, PROFIBUS DP |
| Thermal Management | Integrated twin fan module assembly |
Siemens Fieldbus and Backplane Determinism
The NCU 720.3B PN module utilizes high-velocity backplane bus channels to establish deterministic processing loops between the CNC engine and the embedded S7-300 PLC 317-3 PN/DP logic controller. Industrial Ethernet and PROFINET deterministic networks handle real-time synchronization between axis drive loops and remote I/O nodes. To prevent bus communication faults or initialization stalls, control engineers must verify matching firmware flash compatibility across both the system flash card and the active controller software partitions prior to powering up the system.
Frequently Asked Questions
Q: Can maintenance staff replace the 6FC5372-0AA30-0AB0 module while the main subrack power is active?
A: No, you must shut off the main 24 VDC subrack power supply before removing or inserting the unit. Hot-swapping the hardware causes electrical arcing on backplane connector contacts and risks corrupting volatile active program memory.
Q: How does the unit retain critical machine parameters during a total line shutdown?
A: System parameters, flag states, and zero offsets store directly inside the 1 MB non-volatile memory partition backed by an internal battery circuit, preventing data loss across prolonged unpowered states.
Field Installation Guidelines
Secure the NCU housing vertically into its dedicated subrack slot within the enclosure. Tighten all mechanical retaining fasteners to establish a low-impedance grounding path between the module frame and the equipment rack chassis. Ensure a minimum vertical clearance of 100 mm above and below the twin fan module to maintain adequate convection and airflow cooling.
Connect all PROFINET and PROFIBUS DP cables using industrial-grade, double-shielded twisted-pair wiring. Secure external cable shielding to ground via low-impedance grounding clamps mounted directly near the enclosure cabinet entry point. Maintain a minimum physical isolation distance of 200 mm between communication buses and high-power AC drive motor cables to prevent high-frequency noise interference.