6FX2002-1DC00-1BF0 Siemens MOTION-CONNECT 200 Drive Cable
Manufacturer: Siemens
-
Part Number: 6FX2002-1DC00-1BF0
Condition：New with Original Package
Product Type: Pre-Assembled Drive Cables
-
Country of Origin: USA
Payment:T/T, Western Union
Shipping port: Xiamen
Warranty: 12 months
Siemens 6FX2002-1DC00-1BF0 MOTION-CONNECT 200 Pre-Assembled Drive Cable
The Siemens 6FX2002-1DC00-1BF0, also cataloged as the 6FX2002-1DC00-1BF0 Pre-Assembled Drive Cable, operates as a dedicated hardware component for continuous signal and power routing within SINUMERIK, SIMODRIVE, and SINAMICS motion networks. Factory-terminated with thread-locking Siemens C-connectors, this 15-meter assembly maintains electrical continuity across dynamic drag-chain installations. Internal shielded power and control conductors prevent electromagnetic cross-talk between high-speed drive outputs and feedback loops during rapid motion profiles.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | 6FX2002-1DC00-1BF0 |
| Brand | Siemens |
| Origin | Germany |
| Weight | Standard industrial drive cable weight |
| Dimensions | Outer Diameter 12-16 mm, Length 15 m |
| Operating Temp | Standard industrial drag-chain ambient limits |
| Power Consumption | Passive cabling assembly |
| Product Type | Pre-Assembled Drive Cables |
| Series | MOTION-CONNECT 200 |
| Connector Type | Siemens C-connector, pre-assembled, threaded |
| Cable Type | Trailing-rated for dynamic motion |
| Compliance | UL/CSA approved, DESINA compliant |
Profinet / EtherNet/IP Deterministic Networks and Dynamic Cable Integrity
To preserve deterministic control cycles across high-speed drive networks, the MOTION-CONNECT 200 construction utilizes low-capacitance conductor insulation combined with high-coverage overall shielding. This configuration prevents attenuation and phase jitter during continuous flexing in cable carriers. The outer sheath and internal lay geometry are specifically engineered to withstand tortional forces, protecting signal integrity across high-speed SINAMICS motion control interfaces.
Frequently Asked Questions
Q: What installation constraints apply to the pre-assembled threaded Siemens C-connectors?
A: Connectors must be hand-tightened until full thread engagement is reached to guarantee IP-rated sealing and continuous 360-degree shielding contact. Tools must not be over-torqued beyond specified mechanical limits to prevent connector housing damage.
Q: Can this cable assembly be modified or field-cut to shorter lengths?
A: Field cutting is not recommended as factory-molded strain relief and factory-tested termination standards preserve UL/CSA approval and noise immunity within trailing applications.
Q: How does the dynamic bending radius impact operational lifespan in drag chains?
A: Maintaining the manufacturer-specified minimum bending radius inside the drag chain prevents conductor fatigue, jacket abrasion, and shield separation during high-acceleration motion cycles.
Field Installation Guidelines
Mount the cable within drag chains without twisting, ensuring conductors lay parallel across the carrier width. Verify that cable ties or clamping brackets secure the cable at both ends of the drag chain to prevent tensile loading on the Siemens C-connector interfaces.
Maintain adequate clearance between power conductors and sensitive low-voltage feedback lines within the same carrier track. Ensure the outer shield at the connector backshell establishes full earth grounding at the drive module chassis to suppress high-frequency PWM switching interference.