6FX8002-2DC10-1BA0 Siemens MOTION-CONNECT 800PLUS Power Cables
Manufacturer: Siemens
-
Part Number: 6FX8002-2DC10-1BA0
Condition：New with Original Package
Product Type: Power Cables
-
Country of Origin: USA
Payment:T/T, Western Union
Shipping port: Xiamen
Warranty: 12 months
Siemens 6FX8002-2DC10-1BA0 MOTION-CONNECT 800PLUS Drive Cable
The Siemens 6FX8002-2DC10-1BA0, also cataloged as the 6FX8002-2DC10 Power and Signal Cable, operates as a dedicated hardware component for high-dynamic energy and signal transmission within SINAMICS, SIMODRIVE, and MASTERDRIVES drive systems.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | 6FX8002-2DC10-1BA0 |
| Brand | Siemens |
| Origin | Germany |
| Weight | 0.45 kg/m |
| Dimensions | Outer diameter: 15.5 mm |
| Operating Temp | -20 to +80 deg C (moving) |
| Power Consumption | Passive cabling component |
| Series | MOTION-CONNECT 800PLUS |
| Product Type | Pre-Assembled Power/Signal Cable |
| System Compatibility | SINAMICS, SIMODRIVE, MASTERDRIVES |
| Conductor Configuration | 4 x 4 mm2 + 2 x 2.5 mm2 |
| Connector Type | C-connector, full-thread size 1.5 |
| Construction | Trailing-rated for dynamic moving applications |
| Compliance | UL/CSA approved, DESINA compliant |
Backplane Bus Communication Velocity and Deterministic Execution
The 6FX8002-2DC10-1BA0 maintains electrical continuity and signal integrity during fast-cycle motion sequences across SINAMICS and SIMODRIVE architectures. Heavy-gauge 4 mm2 power cores combined with 2.5 mm2 control cores minimize voltage drop and suppress electromagnetic interference during rapid acceleration phases. Internal firmware flash compatibility and matched connector pin assignments allow predictable feedback loop processing, matching the backplane bus communication velocity demands of modern digital drive controllers without inducing frame jitter or transmission line losses.
Frequently Asked Questions
Q: What structural property allows the cable to operate continuously in dynamic drag chains?
A: The cable utilizes a trailing-rated outer jacket with flexible stranded conductors specifically designed to withstand continuous bending loads in moving drag chains.
Q: How is shield ground continuity maintained at the controller interface?
A: The pre-assembled full-thread size 1.5 C-connector provides 360-degree shielding contact to dissipate high-frequency electrical noise to functional earth.
Field Installation Guidelines
Ensure total electrical isolation of the drive controller and motor prior to handling or installation. Install the cable into drag chains without twisting or binding, strictly maintaining the minimum specified dynamic bending radius to avoid conductor strain. Route power lines separately from sensitive encoder or low-level signal cables to prevent inductive cross-talk. When mating the size 1.5 C-connector, turn the full-thread coupling until fully seated, ensuring at least 5 thread engagement turns for vibration-proof retention. Ground all shield braid connections directly to functional earth (FE) rails.