6GK5008-0BA10-1AB2 Siemens Managed Ethernet Switch
Manufacturer: Siemens
-
Part Number: 6GK5008-0BA10-1AB2
Condition：New with Original Package
Product Type: Managed Industrial Ethernet Switches
-
Country of Origin: USA
Payment:T/T, Western Union
Shipping port: Xiamen
Warranty: 12 months
Siemens 6GK5008-0BA10-1AB2 SCALANCE XB008 Managed Industrial Ethernet Switch
The Siemens 6GK5008-0BA10-1AB2, also cataloged as the 6GK5008-0BA10-1AB2 Managed Industrial Ethernet Switch, operates as a dedicated hardware component for deterministic packet switching and network diagnostics within PROFINET industrial networks.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | 6GK5008-0BA10-1AB2 |
| Brand | Siemens |
| Origin | Germany |
| Weight | 0.35 kg |
| Dimensions | 40 x 125 x 75 mm |
| Operating Temp | 0 to +60 deg C |
| Power Consumption | 4 to 5 W |
| Product Type | Managed Industrial Ethernet Switches |
| Ports | 8 x RJ45 (10/100 Mbit/s, Auto-MDI/MDIX) |
| Switching Logic | Store-and-forward |
| Supported Protocols | PROFINET diagnostics, SNMP, DHCP, basic VLAN |
| Supply Voltage | 24 VDC (Redundant inputs supported) |
| Mounting Format | DIN rail or wall mount |
| Enclosure Rating | IP20 |
Profinet Deterministic Network & Backplane Performance
The module integrates hardware-level store-and-forward switching logic across all 8 Fast Ethernet ports to optimize backplane communication velocity and lower packet transmission jitter. Designed for high I/O density scaling, the internal processor handles cyclic PROFINET diagnostic queries and SNMP telemetry without compromising real-time data exchange between programmable logic controllers (PLCs) and field devices. Dual terminal blocks accommodate redundant 24 VDC power feeds to guarantee uninterrupted operation across the backplane in critical control topologies.
Frequently Asked Questions
Q: How do technicians access the basic management interface for diagnostic configuration?
A: Engineers configure port parameters, VLANs, and SNMP monitoring directly via the embedded web-based management interface using a standard web browser connected to any active RJ45 port.
Q: What happens to field communications if one of the dual 24 VDC power supply inputs loses voltage?
A: Internal reverse-polarity diode circuits isolate the incoming lines, allowing the primary power processing module to draw load continuously from the remaining active line without triggering a reset or packet loss.
Field Installation Guidelines
Mount the unit vertically onto a grounding-bonded 35 mm DIN rail or chassis plate to maintain optimal passive thermal dissipation. Maintain a minimum spacing of 50 mm above and below the top and bottom ventilation paths of the IP20 housing. Connect the functional earth terminal directly to the central enclosure ground bar using low-impedance copper grounding wire to minimize electromagnetic interference (EMI). Route all shielded twisted-pair (STP) Ethernet cabling separately from high-voltage AC lines or motor variable frequency drive outputs to avoid cross-talk.