7KG8000-8AA20/FF Siemens SIMEAS Q PROFIBUS DP Power Module
Manufacturer: Siemens
-
Part Number: 7KG8000-8AA20/FF
Condition：New with Original Package
Product Type: Power Quality Monitoring Devices
-
Country of Origin: USA
Payment:T/T, Western Union
Shipping port: Xiamen
Warranty: 12 months
Siemens 7KG8000-8AA20/FF SIMEAS Q PROFIBUS DP Module
Configured for power quality monitoring and direct signal transmission in deterministic industrial networks, the Siemens 7KG8000-8AA20/FF (7KG8000 SIMEAS Q Module) provides direct physical/electrical execution. Operating on an auxiliary voltage input of 24 to 60 VDC, this hardware unit processes electrical network parameters while delivering continuous power status diagnostics via an integrated PROFIBUS DP interface. Internal high-speed switching circuits operating at 125 kHz provide low-ripple DC power, and a 4-20 mA analog output loop enables secondary current-based monitoring directly within local control cabinets.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | 7KG8000-8AA20/FF |
| Brand | Siemens |
| Origin | Germany |
| Weight | 1.0 kg |
| Dimensions | Standard Rack / Panel Mount Enclosure |
| Operating Temp | -20 to 60 deg C |
| Power Consumption | 24 to 60 VDC Auxiliary Supply |
| Core Function | Electrical Power Measurement & Monitoring |
| Communication Interface | PROFIBUS DP Protocol |
| System Efficiency | Up to 95% |
| Internal Switching Frequency | 125 kHz |
| Analog Output Signal | 4-20 mA DC |
Siemens Control & Bus Architecture Features
Siemens SIMEAS Q hardware relies on backplane bus communication velocity Licences and deterministic Profinet / EtherNet/IP or PROFIBUS DP protocols to guarantee cyclic data transfer without packet collisions. High I/O density scaling allows control cabinets to host multiple measurement channels within compact rail configurations. Furthermore, internal flash firmware compatibility ensures complete synchronization across Siemens S7-300, S7-400, and S7-1500 master PLCs, eliminating baud rate drift and protocol mismatch during continuous power quality logging.
Frequently Asked Questions
Q: How does the 125 kHz switching frequency affect module performance in noisy environments?
A: High-frequency switching minimizes electrical noise within the secondary filtering stage. The 125 kHz frequency shifts harmonic ripple above the sensitivity threshold of adjacent analog measurement circuits, ensuring stable 4-20 mA signals even during field supply line fluctuations.
Q: What happens to the PROFIBUS DP bus state if auxiliary power drops below 24 VDC?
A: Internal supervisory circuits monitor input rail voltage and initiate a controlled bus shutdown sequence when voltage falls below the operating threshold. This prevents partial frames from corrupting PROFIBUS DP network traffic and flags a bus-fault status to the master controller.
Q: Can this unit operate directly on 230 VAC mains without an external converter?
A: No. Connecting 230 VAC directly to the power terminal blocks will instantly damage the internal auxiliary power supply. This specific model strictly accepts DC input voltages ranging between 24 VDC and 60 VDC.
Field Installation Guidelines
Install the module inside a grounded, IP54-rated metal enclosure to protect internal electronics against conductive dust and moisture. Maintain a minimum vertical clearance of 50 mm above and below the housing to facilitate natural thermal convection and prevent thermal overheating across internal power components.
Connect the PROFIBUS DP sub-D connector using shielded twisted-pair cables manufactured to EN 50170 standards. Ground the cable shield at both ends through low-impedance ground clamps directly attached to the DIN rail or enclosure backplate. Run all 24-60 VDC supply lines and 4-20 mA signal loops in separate conduit trunks away from high-voltage motor cables to suppress electromagnetic interference and prevent signal cross-talk.