{"product_id":"8280-192-woodward-overspeed-protection-module","title":"8280-192 Woodward Overspeed Protection Module","description":"\u003ch2\u003eWoodward 8280-192 ProTech-GII Overspeed Protection Module\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eWoodward 8280-192\u003c\/strong\u003e serves as the primary \u003cstrong\u003e8280-192\u003c\/strong\u003e ProTech-GII Overspeed Protection Module utilized to execute shaft speed evaluation and high-speed emergency trip signaling across prime mover control platforms. The device continuously converts incoming pulse signals from active or passive magnetic pickup sensors into digital frequency values while providing a proportional 4-20 mA analog output for external process loops. Upon detecting shaft speed values exceeding specified thresholds, internal trip relays actuate within milliseconds to drive emergency shutdown valves or trip breakers.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e8280-192\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eWoodward\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003eStandard Chassis Weight (Ref. Documentation)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e330 mm x 486 mm x 153 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e-40 to +85 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003e18-40 VDC nominal (8 A max current)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eProTech-GII Overspeed Protection \u0026amp; Speed Control Module\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoting Architecture\u003c\/td\u003e\n\u003ctd\u003eTriple Modular Redundancy (TMR) 2oo3 voting logic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSensor Interface\u003c\/td\u003e\n\u003ctd\u003eActive or passive magnetic pickup (MPU) inputs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAnalog Output\u003c\/td\u003e\n\u003ctd\u003e4-20 mA speed readout signal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnclosure Protection\u003c\/td\u003e\n\u003ctd\u003eIP56 rated dust and water resistant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Humidity\u003c\/td\u003e\n\u003ctd\u003e5-95% non-condensing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eActuator Loop Feedback and Speed Sensing Dynamics\u003c\/h3\u003e\n\u003cp\u003eInternal signal processing channels process pulse trains from the field sensors to generate stable frequency measurements. Furthermore, the unit dynamically drives actuator loop feedback response circuits to maintain precise closed-loop speed control alongside digital load-sharing functions. Passive thermal heat sink dissipation profiles prevent thermal buildup on primary power semiconductors, while hardware watchdog timers continuously monitor processor execution integrity to prevent undetected internal system hangs.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: How does the module maintain system availability if a single internal processing channel fails?\u003c\/p\u003e\n\u003cp\u003eA: The device utilizes a Triple Modular Redundancy (TMR) 2oo3 voting architecture across three isolated internal modules. If a single channel encounters a failure or sensor signal disruption, the system issues a diagnostic alarm while the remaining two functional channels continue executing fault-tolerant overspeed protection without false tripping.\u003c\/p\u003e\n\u003cp\u003eQ: What power source parameters must technicians verify during panel commissioning?\u003c\/p\u003e\n\u003cp\u003eA: Field engineers must supply a DC voltage source within the nominal 18-40 VDC operating range capable of delivering up to 8 A peak current. In addition, power supply wiring must include proper fused protection and low-impedance connection points to avoid voltage drops during high-current relay switching.\u003c\/p\u003e\n\u003cp\u003eQ: How should signal cable shielding be landed to prevent electrical noise on the 4-20 mA output?\u003c\/p\u003e\n\u003cp\u003eA: Shielded twisted-pair wiring must be grounded at the module PE grounding stud only, leaving the destination instrument end floating. This single-point grounding scheme suppresses ground loop currents and electromagnetic interference from corrupting the 4-20 mA speed readout signal.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cp\u003eMount the module vertically to an unyielding bulkhead frame, ensuring at least 100 mm of clear space surrounding the IP56 enclosure to support natural convective airflow across the integrated cooling surfaces. Route all magnetic pickup (MPU) signal cables and 4-20 mA analog output lines through dedicated, shielded metallic conduit kept physically separated from high-voltage AC conductors or variable frequency drive output cables.\u003c\/p\u003e\n\u003cp\u003eEstablish a firm chassis bond by connecting a stranded copper conductor (minimum 4 mm sq) from the main protective earth (PE) terminal stud directly to the central panel earth bus. Strip field wire ends to specified terminal insertion lengths before securing screw clamp connections, verifying correct terminal polarity across the 18-40 VDC supply input prior to energizing the device.\u003c\/p\u003e","brand":"Woodward","offers":[{"title":"Default Title","offer_id":43906759721059,"sku":"8280-192","price":310.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0583\/5246\/8067\/files\/46_34c07093-5263-4d0d-ba7d-bec6f60e8f31.jpg?v=1766462204","url":"https:\/\/www.autocontrolglobal.com\/products\/8280-192-woodward-overspeed-protection-module","provider":"AutoControl Global","version":"1.0","type":"link"}