{"product_id":"8290-200-woodward-rev-j-electric-governor-speed-control","title":"8290-200 Woodward Rev J Electric Governor Speed Control","description":"\u003ch2\u003eWoodward 8290-200 Electric Governor Module\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eWoodward 8290-200\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003e8290-200\u003c\/strong\u003e Electrically Powered Governor Speed Control, operates as a dedicated hardware component for precise engine speed regulation and fuel rack positioning within prime mover control systems. Operating on a 24 VDC nominal supply, the Rev J assembly processes analog control signals to drive proportional electromechanical actuators. By executing rapid corrections in response to dynamic shaft loads, the unit eliminates steady-state speed droop and protects rotating equipment during sudden load reject sequences.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e8290-200 (Rev J)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eWoodward\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e2.5 kg - 3.0 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e150 mm x 120 mm x 90 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e-40 deg C to +85 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003e24 VDC nominal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eElectrically powered governor speed control\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRevision\u003c\/td\u003e\n\u003ctd\u003eRev J\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eActuation Method\u003c\/td\u003e\n\u003ctd\u003eElectronic actuator driver\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eControl Function\u003c\/td\u003e\n\u003ctd\u003eEngine speed regulation and fuel rack positioning\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eControl Input\u003c\/td\u003e\n\u003ctd\u003eCompatible with Woodward electronic governors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStorage Temp\u003c\/td\u003e\n\u003ctd\u003e-40 deg C to +85 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHousing Rating\u003c\/td\u003e\n\u003ctd\u003eRugged industrial enclosure, vibration-resistant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCertifications\u003c\/td\u003e\n\u003ctd\u003eCE, UL, RoHS compliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eActuator Loop Feedback Response \u0026amp; Dynamic Gain Adjustment\u003c\/h3\u003e\n\u003cp\u003eThe 8290-200 incorporates high-speed error processing circuits to optimize actuator loop feedback response under severe transient conditions. Internal driver stages convert speed error voltages into proportional current outputs, commanding the actuator output shaft to re-position the fuel rack within milliseconds. Onboard potentiometer adjustments allow technicians to calibrate gain and stability parameters to match prime mover system inertia. To maintain output linearity across the extended -40 deg C to +85 deg C operating band, heavy-duty thermal heat sink dissipation surfaces dissipate internal power transistor thermal energy directly through the cast enclosure wall.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: What operational symptoms indicate improper gain settings on the 8290-200 module?\u003c\/p\u003e\n\u003cp\u003eA: Excessive gain causes high-frequency actuator hunting or shaft oscillation around the setpoint, whereas insufficient gain results in slow transient recovery and excessive speed droop during sudden load steps.\u003c\/p\u003e\n\u003cp\u003eQ: How does the 24 VDC power supply quality affect actuator driving torque?\u003c\/p\u003e\n\u003cp\u003eA: Insufficient supply current or excessive DC voltage ripple reduces the peak magnetic force generated inside the actuator coil, slowing shaft response times and reducing total available output torque.\u003c\/p\u003e\n\u003cp\u003eQ: Are special terminal grounding steps required for shield wires on this governor unit?\u003c\/p\u003e\n\u003cp\u003eA: Yes, all signal and magnetic pickup shield wires must terminate to chassis ground at the control module side only, preventing ground loop noise coupling into sensitive error amplifier inputs.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cp\u003eInstall the module chassis vertically on a structural bulkhead adjacent to the engine actuator, avoiding locations exposed to direct radiant exhaust heat or intense liquid spraying. Confirm that the mounting location provides unobstructed airflow across the integrated thermal heatsink fins. Verify electrical ground continuity between the module enclosure frame and the main machinery bedplate using a dedicated low-impedance copper bonding strap.\u003c\/p\u003e\n\u003cp\u003eComplete all electrical terminations using shielded twisted-pair cabling rated for industrial cabinet temperatures. Separate low-level input control wires from high-current 24 VDC supply lines by routing them in distinct wiring trays. Where wiring enters rigid conduit boxes or junction enclosures, ensure NPT thread connections maintain standard engagement rules (5 full turns minimum engagement). Inspect the mechanical governor linkage for complete freedom of movement before applying 24 VDC power to ensure the actuator shaft does not bind at either limit stop.\u003c\/p\u003e","brand":"Woodward","offers":[{"title":"Default Title","offer_id":43907247308899,"sku":"8290-200","price":310.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0583\/5246\/8067\/files\/50_f40297d1-7a6e-4dd9-98c2-3e8f6a13417a.jpg?v=1766469459","url":"https:\/\/www.autocontrolglobal.com\/products\/8290-200-woodward-rev-j-electric-governor-speed-control","provider":"AutoControl Global","version":"1.0","type":"link"}