A860-0309-T352 GE Fanuc Alpha Series Position Coder Encoder
Manufacturer: GE Fanuc
-
Part Number: A860-0309-T352
Condition：New with Original Package
Product Type: Rotary Encoders
-
Country of Origin: USA
Payment:T/T, Western Union
Shipping port: Xiamen
Warranty: 12 months
GE Fanuc A860-0309-T352 Alpha Series Position Coder Encoder
Configured for precise rotational feedback execution in CNC spindle drives, the GE Fanuc A860-0309-T352 (A860-0309-T352 Alpha Position Coder) provides direct physical/electrical execution for high-speed motor shaft tracking across industrial automation motion control systems.
Suffix Breakdown & Model Matrix
| Part Segment | Code / Suffix | Technical Definition |
|---|---|---|
| Base Family | A860 | Fanuc Motor Feedback Encoder Family |
| Spec Identifier | 0309 | Physical Housing & Internal Optical Disk Configuration |
| Sub-Variant | T352 | High-Speed Shaft Interface & Communication Circuitry |
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | A860-0309-T352 |
| Brand | GE Fanuc |
| Origin | Japan |
| Weight | 0.794 kg (1.75 lbs) |
| Dimensions | 100 mm x 80 mm x 20 mm |
| Operating Temp | -40 deg C to +70 deg C |
| Power Consumption | 24 VDC Nominal Input |
| Communication | Modbus TCP/IP |
| Max Speed | 10,000 RPM |
| Target Hardware | Fanuc Alpha Series Spindle Motors |
| Diagnostics | Built-in fault detection and system monitoring |
| Certifications | CE Compliant, UL/CSA Approvals |
Backplane Bus Communication & Firmware Flash Compatibility
The feedback transceiver logic interfaces directly via deterministic backplane bus communication velocity and serial link networks, streaming high-frequency shaft position data without cyclic delay. Integrated signal processing circuits validate pulse edges up to 10,000 RPM, maintaining firmware flash compatibility with main host controller hardware for real-time diagnostic reporting. Internal firmware continuously monitors optical track integrity, instantly generating Modbus TCP/IP error flags if line driver loss or signal degradation occurs during high-speed spindle deceleration.
Frequently Asked Questions
Q: How does the A860-0309-T352 handle diagnostic signaling across Modbus TCP/IP networks?
A: The encoder processes internal fault state logic and broadcasts error status registers over standard Ethernet hardware, allowing host controllers to monitor line driver status, pulse integrity, and supply voltage stability.
Q: What power limits and installation constraints apply to the 24 VDC supply line?
A: The internal electronics require a regulated 24 VDC source; field technicians must keep supply leads short and twisted to suppress line noise that could otherwise induce jitter during high-speed 10,000 RPM feedback cycles.
Field Installation Guidelines
Engineers must mount the encoder housing securely to the Alpha series motor rear flange using calibrated torque settings to ensure zero axial alignment offset. Ensure that all signal cabling utilizes overall braid shielding and ground the shield at the cabinet ground bar to mitigate high-frequency motor drive noise. Technicians should inspect the mating connector contacts before engagement, verify that the 24 VDC supply voltage remains within operational limits before applying power, and route Ethernet communication cables away from heavy three-phase AC power lines to avoid EMI corruption during active spindle operations.