ABB 3BSE008584R1 CI810V1 Brand New Module S800 IO System

Product Overview

The ABB CI810V1 (Part Number: 3BSE008584R1) functions as a high-performance Fieldbus Communication Interface (FCI) within the System 800xA and Advant OCS ecosystems. This device serves as the primary communication gateway that bridges distributed S800 I/O modules with the real-time Advant Fieldbus 100 (AF100) network protocol. By managing cyclic data exchange, diagnostic reporting, and station configuration, the module allows centralized AC 800M or Advant controllers to access remote field signals deterministically. We supply this product as a 100% brand new, original factory-packaged unit from ABB Switzerland, ensuring maximum longevity and adherence to strict industrial quality standards.

Technical Specifications

Engineering Advantages

• Eliminating System Downtime via Hot-Swappable Architecture: The CI810V1 features a true line-replaceable, hot-swappable design. Maintenance technicians can unplug a faulty unit and insert a brand new replacement module without isolating system power or interrupting the continuous operational cycle of neighboring S800 I/O modules.

• Mitigating Network Failures through Media Redundancy: To safeguard mission-critical control loops in processing facilities, the interface provides full support for dual redundant AF100 network lines. If a physical cable break or signal attenuation compromises the primary communication line, the internal hardware immediately routes data packages through the secondary link without dropping control frames.

• Withstanding Thermal Extremes in Field Enclosures: While standard network gear fails outside air-conditioned control rooms, the ruggedized components inside the CI810V1 tolerate ambient environments ranging from -40 up to +70 degrees Celsius. This extended thermal range permits direct deployment in decentralized field cubicles located near the actual physical process.

• Noise Immunity and Cabinet Space Optimization: At just 2.2 cm wide, this ultra-slim interface conserves expensive DIN-rail real estate inside control cabinets. Furthermore, the unit complies with international electromagnetic compatibility (EMC) guidelines, shielding internal memory assets from high-frequency electrical noise generated by adjacent variable frequency drives (VFDs) and heavy switchgear.

FAQs

• Does this unit arrive in brand new condition, and does it include the official factory warranty?

  Yes. We ship this module as a 100% brand new, authentic product in original ABB factory packaging. It carries the complete manufacturer warranty protection.

• Can the CI810V1 module operate standalone without a separate mounting base?

  No. The module requires a compatible S800 I/O termination unit or baseplate to secure physical connection pins to the DIN-rail, fieldbus medium, and 24V DC power distribution buses.

• What precautions should I take regarding the IP20 environmental rating?

  The IP20 rating means the device lacks liquid ingress protection. You must install this interface inside an appropriately sealed, dust-tight industrial enclosure (such as an IP54 or NEMA 12 rated cabinet) to protect the internal circuitry from condensation, moisture, and conductive particulate contaminants.

• How does the CI810V1 handle firmware management during replacement?

  The dual 0.5 MB Flash ROM chips store the core communication firmware. When executing a hot-swap replacement with a brand new module, the system master verifies code compatibility and ensures seamless synchronization with the running controller configuration.