ABB DSQC323 S4C Series Expansion Memory Board
Manufacturer: ABB
-
Part Number: DSQC323 3HAB5956-1
Condition：New with Original Package
Product Type: Expansion Memory Boards
-
Country of Origin: Sweden
Payment:T/T, Western Union
Shipping port: Xiamen
Warranty: 12 months
ABB DSQC323 Expansion Memory Board
The ABB DSQC323 (DSQC323 Expansion Memory Board), also cataloged as the 3HAB5956-1 Memory and I/O expansion board, operates as a dedicated hardware component for memory scaling and signal processing within S4C and S4C+ controller platforms.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | DSQC323 |
| Brand | ABB |
| Origin | Germany |
| Weight | 0.4 kg |
| Dimensions | 260 x 180 x 160 mm |
| Operating Temp | -20 deg C to +60 deg C |
| Power Consumption | 1.5 W |
| Memory | 8 MB RAM |
| Digital I/O | 16 DI / 16 DO (24 VDC) |
PLC and Drive System Deterministic Networks
The DSQC323 module integrates into the S4C controller backplane to provide deterministic I/O expansion and memory augmentation. The architecture supports backplane bus communication protocols required for high-speed robot path execution. Furthermore, firmware flash compatibility allows for controlled updates when integrating with newer industrial network modules such as Profinet or DeviceNet. The board manages I/O density scaling by providing discrete transistor outputs that handle loads up to 0.5 A per channel, maintaining signal stability during high-frequency switching cycles.
Frequently Asked Questions (FAQ)
Q: Does the DSQC323 module support hot-swapping during active robot operation?
A: No, you must power down the S4C controller prior to module insertion or removal to prevent potential damage to the backplane bus pins or internal logic components.
Q: Is the 8 MB RAM expansion persistent if the controller loses main power?
A: The module relies on the controller's internal battery-backed supply to maintain data integrity within the RAM segments. Verify the controller battery health regularly to prevent program loss.
Field Installation Guidelines
- Ensure the controller is completely de-energized and follows proper lockout/tagout procedures before accessing the internal chassis.
- Align the module with the designated S4C expansion slot, ensuring the connector pins seat squarely before applying pressure.
- Secure the module using the existing chassis mounting points to minimize mechanical stress on the PCB.
- Route all 24 VDC I/O cabling away from high-voltage motor power leads to prevent electromagnetic noise interference.
- Verify ground continuity between the module chassis and the main controller cabinet frame to reduce the risk of potential electrical surges.