{"product_id":"abb-dsqc346g-irc5-series-i-o-interface-board-technical-specifications","title":"ABB DSQC346G IRC5 Series I\/O Interface Board Technical Specifications","description":"\u003ch2\u003eABB DSQC346G I\/O Interface Board\u003c\/h2\u003e\n\u003cp\u003eConfigured for field device integration in IRC5 robot controller systems, the \u003cstrong\u003eABB DSQC346G\u003c\/strong\u003e (\u003cstrong\u003eDSQC346G\u003c\/strong\u003e I\/O Interface Board) provides direct physical and electrical signal execution.\u003c\/p\u003e\n\u003ch3\u003eSuffix Breakdown \u0026amp; Model Matrix\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eDSQC346G\u003c\/strong\u003e series functions as a specialized high-density interface module. The identifier \u003cstrong\u003e3HAB8101-8\/08E\u003c\/strong\u003e denotes the specific hardware revision compatible with standard IRC5 backplane architectures. This unit manages both discrete digital logic and continuous analog process signals within a unified chassis footprint.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eDSQC346G\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eABB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUnited States\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.4 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e220 x 100 x 25 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e0 deg C to +55 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003e\u0026lt; 10 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDigital I\/O\u003c\/td\u003e\n\u003ctd\u003e32 In \/ 32 Out (24 VDC)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAnalog I\/O\u003c\/td\u003e\n\u003ctd\u003e4 In \/ 4 Out (0-10 V \/ 4-20 mA)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIsolation\u003c\/td\u003e\n\u003ctd\u003eOptical \/ 1500 V AC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003ePLC and Drive System Deterministic Networks\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eDSQC346G\u003c\/strong\u003e utilizes high-speed backplane bus communication to maintain deterministic performance between the robot controller and connected peripheral devices. The internal firmware optimizes I\/O density scaling, allowing for simultaneous processing of digital and analog channels without exceeding local bus bandwidth limitations. Furthermore, the optical isolation layers maintain signal integrity by suppressing common-mode noise and ground loops. This architecture ensures that real-time response targets below 2 ms remain consistent even when the I\/O rack operates at peak electrical load.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions (FAQ)\u003c\/h3\u003e\n\u003cp\u003eQ: Does the DSQC346G support hot-swapping while the IRC5 controller is energized?\u003c\/p\u003e\n\u003cp\u003eA: No, personnel must de-energize the controller backplane before removing or inserting the module. Hot-plugging risks damage to the edge connector pins and internal logic circuits.\u003c\/p\u003e\n\u003cp\u003eQ: How is the analog signal range configured?\u003c\/p\u003e\n\u003cp\u003eA: The input and output modes (voltage vs. current) are typically assigned through the robot controller software parameters. Ensure the hardware jumpers, if present on specific sub-revisions, align with the software configuration to prevent signal measurement errors.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eInspect the IRC5 controller rack slot for bent pins or metallic debris prior to insertion.\u003c\/li\u003e\n\u003cli\u003eAlign the module vertically within the guide rails to ensure proper engagement with the backplane connector.\u003c\/li\u003e\n\u003cli\u003eTighten the locking screws at the top and bottom of the front panel to establish a secure ground connection to the chassis.\u003c\/li\u003e\n\u003cli\u003eSeparate high-voltage power cables from I\/O signal wiring by a minimum of 200 mm to minimize electromagnetic coupling.\u003c\/li\u003e\n\u003cli\u003eApply ferrules to all stranded wire terminations to ensure reliable contact within the terminal blocks and prevent strand fraying.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"ABB","offers":[{"title":"Default Title","offer_id":44324921901155,"sku":"DSQC346G 3HAB8108-8","price":676.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0583\/5246\/8067\/files\/506._f4bfe8e1-8a53-4e54-9b55-223bbb73eed7.jpg?v=1783410336","url":"https:\/\/www.autocontrolglobal.com\/products\/abb-dsqc346g-irc5-series-i-o-interface-board-technical-specifications","provider":"AutoControl Global","version":"1.0","type":"link"}