ABB EC-BOM-G009HLA111 Uvisor SF/FAU Infrared Flame Scanner
Manufacturer: ABB
-
Part Number: EC-BOM-G009HLA111
Condition：New with Original Package
Product Type: Infrared Flame Scanners
-
Country of Origin: Sweden
Payment:T/T, Western Union
Shipping port: Xiamen
Warranty: 12 months
ABB EC-BOM-G009HLA111 Uvisor SF/FAU Series Infrared Flame Scanner
Configured for continuous combustion flame radiation detection in industrial burner monitoring systems, the ABB EC-BOM-G009HLA111 (EC-BOM-G009HLA111 Infrared Flame Scanner Module) provides direct physical/electrical execution. It functions as an optical sensor unit within ABB Uvisor SF and FAU controller architectures, capturing raw infrared flicker frequencies emitted by fuel combustion processes and transferring proportional raw flame signals to downstream processing units.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | EC-BOM-G009HLA111 |
| Brand | ABB |
| Catalog Description | UR600 IR Mod.1000 senza lente, con ghiera |
| Product Family | Combustion Instruments - Uvisor SF/FAU Series |
| Module Type | Infrared Flame Scanner Unit |
| Origin | USA |
| Net Dimensions (W x H x D) | 180 mm x 150 mm x 67 mm (7.09 in x 5.91 in x 2.64 in) |
| Gross Package Weight | 1573 g |
| Mounting Configuration | External Retaining Ring Included (Lens Not Included) |
| Operating Temperature | Standard Industrial Range |
| Power Consumption | System Backplane Dependent / Controller Powered |
| Signal Output Type | Raw Infrared Flame Flicker Signal |
| Optical Spectrum | Infrared (IR) |
| Customs Tariff Number | 9031809090 |
| WEEE Category | Category 5 - Small Equipment (no external dimension >50 cm) |
Backplane Communication & I/O Scaling Profiles
The module interfaces directly with Uvisor SF and FAU control platforms, delivering precise raw signal values over backplane bus communication lines. Internal signal scaling maintains low attenuation across variable flame intensity profiles, suppressing signal noise and optical cross-talk generated by adjacent burner flames. Firmware flash compatibility ensures seamless integration with Uvisor monitoring units, enabling high-density signal evaluation without introducing processing latencies.
Frequently Asked Questions
Q: Does the EC-BOM-G009HLA111 module include integrated focusing optics upon delivery?
A: No. The unit is supplied without an internal optical lens ("senza lente") but incorporates a factory retaining ring ("con ghiera") to accept specific lens assemblies suited to burner sight tube geometry.
Q: What optical spectrum and signal characteristics does the scanner evaluate?
A: The scanner detects infrared flicker radiation generated by target flames and transmits the unconditioned raw AC/DC signal directly to the evaluation controller.
Q: Can this scanner module be hot-swapped during active burner management system operations?
A: Field replacement requires power isolation or verification of safe backplane bus removal parameters specified by the parent Uvisor system enclosure to prevent transient signal faults.
Field Installation Guidelines
- Ensure proper mechanical alignment of the housing with the burner sight path to maintain direct line-of-sight with the primary ignition zone.
- Torque the optical retaining ring to vendor-recommended limits to prevent optical misalignment caused by continuous structural combustion vibration.
- Establish a single-point continuous shield ground for signal cabling to eliminate ground loops and minimize electromagnetic interference from high-voltage ignition transformers.
- Verify sight tube cooling air purge pressure before continuous thermal exposure to maintain housing temperatures within specified operating limits.
- Route low-level raw signal wiring in dedicated, grounded metallic conduits separate from three-phase AC power lines or heavy motor drives.