ABB HC800 B2 Symphony Plus Control Processor Module
ABB HC800 B2 Symphony Plus Control Processor Module
ABB HC800 B2 Symphony Plus Control Processor Module
/ 3

ABB HC800 B2 Symphony Plus Control Processor Module

  • Manufacturer: ABB

  • Part Number: HC800 B2

  • Condition:New with Original Package

  • Product Type: Control Processor Modules

  • Country of Origin: Sweden

  • Payment:T/T, Western Union

  • Shipping port: Xiamen

  • Warranty: 12 months

ABB HC800 B2 Symphony Plus SD Series Control Processor Module

The ABB HC800 B2 (Product ID: HC800) is the central control processor module for the ABB Symphony Plus SD Series HPC800 controller. Powered by an industrial 32-bit RISC processor with 64 MB RAM, 4 MB ROM, and 2 MB NVRAM, it executes up to 30,000 function blocks, manages process logic, and handles 10/100 Mbps Ethernet communication over Modbus TCP.

Technical Specifications

Parameter Specification
Model HC800 B2
Base Product ID HC800
Brand ABB
Product Series Symphony Plus SD Series
Compatible Controller HPC800
Product Type Control Processor Module
Processor Architecture Industrial 32-bit RISC
Function Block Capacity Up to 30,000
Memory 64 MB RAM, 4 MB ROM, 2 MB NVRAM
Ethernet Interface 10/100 Mbps
Communication Protocol Modbus TCP
Supply Voltage 24 VDC +/-10%
Typical Power Consumption 5 W per module
Mounting Base ABB MB810
Backup Battery 1 x Lithium button cell (5 g)
Dimensions 78.74 mm x 243.84 mm x 210.82 mm (3.1 in x 9.6 in x 8.3 in)
Weight 0.88 kg (1.94 lbs)
Certifications CE, ATEX, IECEx, UL, CSA
Environmental Compliance RoHS compliant (WEEE Category 5, small equipment up to 50 cm)
Country of Origin Switzerland

Architecture and System Integration

The HC800 B2 functions as the main execution engine within an HPC800 controller station. Its 32-bit RISC CPU processes continuous and discrete control strategies across up to 30,000 function blocks, while the 2 MB non-volatile RAM (NVRAM) and onboard lithium button cell retain critical runtime data during power interruptions.

For plant-level and device connectivity, the processor integrates a 10/100 Mbps Ethernet interface supporting Modbus TCP. Mechanically, the module mounts onto an ABB MB810 mounting base, which provides the physical backplane connection within the Symphony Plus SD Series cabinet assembly.

Frequently Asked Questions

Q: What mounting hardware is required for the ABB HC800 B2? A: The module requires an ABB MB810 mounting base for physical installation and system bus connection within an HPC800 controller assembly.

Q: What are the power supply requirements for the HC800 B2? A: The processor operates on a nominal 24 VDC supply with a +/-10% tolerance and draws approximately 5 W per module under typical operating conditions.

Q: What certifications apply to this processor module? A: The HC800 B2 carries CE, ATEX, IECEx, UL, and CSA certifications and complies with RoHS environmental standards.

You may also like