ADV551-P10 S2 ADV551 Yokogawa Digital Output Module
Manufacturer: Yokogawa
-
Part Number: ADV551-P10 S2
Condition：New with Original Package
Product Type: Digital Output Modules
-
Country of Origin: Japan
Payment:T/T, Western Union
Shipping port: Xiamen
Warranty: 12 months
Yokogawa ADV551-P10 S2 Digital Output Module
The Yokogawa ADV551-P10 S2, also cataloged as the ADV551 Digital Output Module, operates as a dedicated hardware component for discrete signal actuation within CENTUM VP and CS 3000 DCS platforms.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | ADV551-P10 S2 |
| Brand | Yokogawa |
| Origin | Indonesia |
| Weight | 0.36 kg |
| Dimensions | 81 x 103 x 146 mm |
| Operating Temp | -20 to +70 deg C |
| Power Consumption | Max 700 mA (5 VDC backplane), 60 mA (external 24 VDC) |
| Number of Channels | 32 digital outputs |
| Output Type | Current sink (NPN transistor) |
| Rated Voltage | 24 VDC (20.4 to 26.4 VDC range) |
| Maximum Load Current | 100 mA per channel at 26.4 VDC |
| Isolation | 2000 VAC (signal-to-system), 500 VAC (between commons) |
| Response Time | <= 3 ms (status output) |
Process DCS & Channel-to-Channel Isolation
The unit utilizes a 32-channel current sink architecture designed to output 24 VDC discrete signals directly to final control elements. To protect system backplane electronics from field-side transients, galvanic isolation rated at 2000 VAC separates the field signals from the internal control logic. Integrated fieldbus drivers support cold junction compensation (CJC) references on relevant analog interfaces across the rack, while the discrete transistor stage limits off-state leakage current to <= 0.1 mA to prevent false activation of high-impedance field loads.
Frequently Asked Questions
Q: Does the module support online module replacement while the DCS controller remains powered?
A: Yes, the hardware design supports hot-swap operations. Technicians can extract and insert the unit directly into an energized node interface unit (NIU) backplane without interrupting adjacent I/O operations or disrupting loop execution on the active controller.
Q: How is external power distributed to the output channels across the field connector?
A: External 24 VDC power feeds into the module via specified terminal connections to supply the load current. Internal circuitry routes this field power through isolated channel groups, drawing a maximum of 60 mA from the external 24 VDC supply for internal drive electronics while delivering up to 100 mA per channel to external field devices.
Field Installation Guidelines
Mount the module into the designated slot of the CENTUM system node unit backplane, pressing firmly until the top and bottom retention latches engage securely. Ensure all field wiring connects through the appropriate pressure clamp terminal block or MIL connector, maintaining a clear physical separation between 24 VDC discrete output lines and high-voltage AC power cables. Connect the cable shield directly to the cabinet functional ground bar using a short, low-impedance copper drain wire to ensure maximum noise immunity. Maintain ambient cabinet airflow to keep operating temperatures within the specified -20 to +70 deg C envelope.