B-V7032-5 HIMA HIMax HIMatrix Controller Cable
Manufacturer: HIMA
-
Part Number: BV7032-5
Condition：New with Original Package
Product Type: Data Cables
-
Country of Origin: Germany
Payment:T/T, Western Union
Shipping port: Xiamen
Warranty: 12 months
HIMA BV7032-5 Data Connecting Cable
Configured for internal bus signal transfer in HIMax and HIMatrix controllers, the HIMA BV7032-5 (BV7032-5 Data Connecting Cable) provides direct physical/electrical execution across safety subrack platforms.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | BV7032-5 |
| Brand | HIMA |
| Origin | Germany |
| Component Type | Flat Shielded Data Cable |
| Cable Structure | 50-core flat conductor assembly |
| Pin Count | 50-pin connectors on both ends |
| Wiring Scheme | 1-to-1 direct pin mapping |
| Cable Length | 0.5 m |
| Ingress Protection / Shielding | Integral EMI metallic shield |
| Weight | 0.09 kg |
| Dimensions | 2 cm x 6 cm x 10.4 cm |
| Operating Temp | Standard cabinet environment specifications |
| Power Consumption | Passive interconnect assembly |
| Certifications | CE, FCC |
Functional Safety & Triple Modular Redundancy Interconnect Attributes
The cable assembly provides point-to-point pin execution to preserve triple modular redundancy (TMR) architectures across PES subracks and expansion racks. High-density metallic shielding provides continuous galvanic isolation boundaries and cross-talk suppression during high-speed communication bursts. This design maintains SIL3 compliance and fail-safe state execution by protecting deterministic internal module communications against high-voltage industrial EMI transients.
Frequently Asked Questions
Q: How does the internal shielding structure affect signal transmission stability?
A: The continuous metallic EMI shielding reduces high-frequency cross-talk and field noise coupling, maintaining low bit-error rates across all 50 parallel signal cores.
Q: Is this cable assembly suitable for hot-swap expansion of I/O subracks?
A: Physical connection or removal must follow strict HIMA PES rack maintenance protocols to prevent unwanted I/O module fault detection or unintended fail-safe channel trips during live controller operation.
Field Installation Guidelines
Execute the following procedures during cabinet layout and physical assembly:
- Inspect the 50-pin header pins and flat cable jacket for physical defects prior to insertion.
- Align the connector orientation keyways on the cable header directly with the subrack board connector to avoid pin bending.
- Seat the 50-pin plug fully into the module header until locking latches engage securely.
- Maintain a minimal bend radius for the flat cable ribbon inside the cabinet to prevent internal conductor strain or degradation of the outer shield braid.
- Verify that nearby high-voltage AC lines or inductive loads are separated by standard industrial ducting barriers to eliminate excessive electrical noise exposure.