C200MDL750B GE Discrete Sourcing Output Module 24 VDC
Manufacturer: GE Fanuc
-
Part Number: IC200MDL750B
Condition：New with Original Package
Product Type: Digital Output Modules
-
Country of Origin: USA
Payment:T/T, Western Union
Shipping port: Xiamen
Warranty: 12 months
GE IC200MDL750B VersaMax Discrete Output Module
Configured for high-speed sourcing output control in VersaMax PLC platforms, the GE IC200MDL750B (IC200MDL750 Discrete Output Module) provides direct physical/electrical execution across 32 DC channels. The internal switching hardware routes positive logic power up to 30 VDC to field actuators, solenoids, and indicators. The circuitry divides the 32 channels into two isolated groups of 16 points, supporting 0.5 A continuous current load per point with built-in protection mechanisms.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | IC200MDL750B (IC200MDL750) |
| Brand | GE Fanuc / Emerson |
| Origin | United States |
| Weight | 0.1 kg (0.30 lbs) |
| Dimensions | 10.9 x 6.4 x 5.8 cm (4.3 x 2.5 x 2.3 in) |
| Operating Temp | -40 deg C to +75 deg C |
| Power Consumption | 90 mA backplane current consumption |
| Output Points | 32 sourcing outputs (2 groups of 16) |
| Output Voltage Range | 10.2-30 VDC (12/24 VDC nominal) |
| Output Current | 0.5 A max per point |
| Response Time | <=0.5 ms ON, <=1.0 ms OFF |
| Isolation | Optical isolation, >=2500 Vrms |
| Protection | Overvoltage, overcurrent, short-circuit |
| Status Indicators | Dedicated channel LEDs + status OK LED |
| Protection Rating | IP20 standard |
Backplane Bus Communication Velocity & Deterministic Network Scaling
The output module manages backplane bus communication velocity by updating channel status within sub-millisecond control execution loops. High-speed switching circuitry yields response times under 0.5 ms for turn-on states and under 1.0 ms for turn-off states, aiding precise timing across deterministic networks. Optical isolation rated at >=2500 Vrms decouples the backplane logic components from field-side voltage spikes and noise. Furthermore, integrated hardware handshaking supports I/O density scaling routines and firmware flash compatibility during hot-swap operations.
Frequently Asked Questions
Q: Does the IC200MDL750B module support hot-swapping during active backplane operation?
A: Yes, technicians can replace the module on an energized VersaMax carrier without interrupting backplane communication to adjacent I/O modules.
Q: What protective features prevent channel failure under accidental short-circuit conditions?
A: Electronic overcurrent and short-circuit protection circuits limit output current automatically upon detecting field wiring faults, clearing when normal loads resume.
Q: How much current does the logic side draw from the primary carrier backplane?
A: The internal logic circuits consume 90 mA of continuous 5 VDC power from the backplane power supply rail.
Field Installation Guidelines
Mount the module directly onto a 35 mm DIN rail or VersaMax carrier until the rear retention mechanism snaps into position. Maintain clear vertical clearance around the module to facilitate natural thermal dissipation across the -40 deg C to +75 deg C operating range. Connect field wiring using terminal blocks, ensuring positive logic sourcing power connects through dedicated fused supply lines. Route low-voltage DC wiring through separate channels away from AC power conductors to prevent capacitive cross-coupling and reduce signal noise.