Digital Output Module | Yokogawa ADV551-P60/D5S00
Manufacturer: Yokogawa
-
Part Number: ADV551-P60/D5S00
Condition：New with Original Package
Product Type: Digital Output Modules
-
Country of Origin: Japan
Payment:T/T, Western Union
Shipping port: Xiamen
Warranty: 12 months
Yokogawa ADV551-P60/D5S00 Digital Output Module
The Yokogawa ADV551-P60/D5S00, also cataloged as the ADV551 Digital Output Module, operates as a dedicated hardware component for 32-channel discrete switching and pulse-width execution within Yokogawa CENTUM VP and FIO networks.
Suffix Breakdown & Model Matrix
| Code | Type | Description |
|---|---|---|
| ADV551 | Base Model | Digital Output Module (32-channel, 24 VDC, Isolated) |
| -P | Output Function | With pulse width output function / time-proportional output function |
| 6 | Hardware Option | With status display; with no explosion protection |
| 0 | Basic Code | Basic type |
| /D5S00 | Option Code | Equipped with ATD5S-00 Pressure Clamp Terminal Block |
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | ADV551-P60/D5S00 |
| Brand | Yokogawa |
| Origin | Indonesia |
| Weight | 0.4 kg (Module + Terminal Block) |
| Dimensions | Standard Yokogawa FIO Module Dimensions |
| Operating Temp | 0 to 60 deg C |
| Power Consumption | Max. 700 mA at 5 VDC (plus external 24 VDC field supply) |
| Channel Count | 32 digital outputs (current sink type) |
| Rated Load Voltage | 24 VDC (Permissible range: 20.4 to 26.4 VDC) |
| Maximum Load Current | 100 mA per channel at 26.4 VDC (Typical: 50 mA at 24 VDC) |
| Response Time | <= 3 ms (Status Output), <= 10 ms (Mixed/Pulse Output) |
| Channel Isolation | Common-minus configuration every 16 channels |
| Dielectric Strength | 2 kV AC (Signal-to-System), 500 V AC (Between commons) |
| Pulse Width Range | 8 ms to 7,200 s (Resolution: 8 ms) |
| Terminal Interface | ATD5S-00 Pressure Clamp Terminal Block |
Process Control & Field Signal Isolation
The hardware enforces galvanic isolation between input logic and field terminal circuits, sustaining a 2 kV AC withstand voltage from field channels to the backplane system bus. Operating via a 24 VDC current-sink transistor network, the output stages group into 16-channel common-minus blocks to isolate ground differentials across multi-point actuator loops. Continuous diagnostic loops scan individual channel drivers, presenting real-time status output states across the front-panel LED matrix while maintaining full hardware switching execution down to 3 ms response intervals.
Frequently Asked Questions
Q: What is the primary functional difference between the ADV551-P60/D5S00 and the older ADV551-P10 variant?
A: The P60 suffix incorporates a front-panel status LED display and diagnostic pushbutton for local state verification, while retaining the pulse-width and time-proportional output function of the P10 model without explosion protection ratings.
Q: How does the /D5S00 option code modify field cabling requirements?
A: The /D5S00 option provides a direct-mount ATD5S-00 pressure clamp terminal block mounted on the front module connector. This enables direct field conductor terminations on the front panel, eliminating external multi-core cabling and intermediate terminal interface boards.
Q: How does the module handle pulse-width output timing configurations?
A: The -P firmware engine accepts software-defined pulse durations ranging from 8 ms to 7,200 s. Pulses are processed in strict 8 ms resolution increments with a maximum OFF-state leakage current under 0.1 mA across all 32 current-sinking transistor channels.
Field Installation Guidelines
Insert the module straight into an unpopulated FIO rack slot until the backplane connectors seat completely. Secure top and bottom panel mounting screws to establish frame ground continuity before applying power.
Wire field conductors directly to the ATD5S-00 pressure clamp terminal block using stranded copper wire sized according to local current demands. Ensure external 24 VDC loop power stays strictly within the 20.4 to 26.4 VDC window under full load conditions (100 mA per channel maximum). Separate field DC output lines from high-voltage AC cables by at least 100 mm inside the control enclosure to prevent electromagnetic coupling.