Discrete Output Module GE IC693MDL752F Series 90-30
Manufacturer: GE Fanuc
-
Part Number: IC693MDL752F
Condition：New with Original Package
Product Type: Digital Output Cards
-
Country of Origin: USA
Payment:T/T, Western Union
Shipping port: Xiamen
Warranty: 12 months
GE Fanuc IC693MDL752F Series 90-30 Digital Output Module
The GE Fanuc IC693MDL752F, also cataloged as the IC693MDL752 DC Output Module, operates as a dedicated hardware component for direct physical switching of 12/24 VDC discrete loads within GE Fanuc Series 90-30 PLC platforms.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | IC693MDL752F (IC693MDL752) |
| Brand | GE Fanuc |
| Origin | USA |
| Weight | 0.30 kg |
| Dimensions | 41 x 140 x 127 mm |
| Operating Temp | 0 to 60 deg C |
| Power Consumption | 300 mA at +5 VDC (backplane bus current draw) |
| Output Points | 32 points (2 isolated groups of 16) |
| Nominal Voltage | 12/24 VDC (operating range 10.2 to 30 VDC) |
| Output Logic | Positive logic (sourcing) |
| Continuous Current | 0.5 A per point, 8 A max per group common |
| Inrush Current | 1.0 A for 10 ms |
| Isolation | 1500 VDC field-to-logic, 250 VAC group-to-group |
| Response Time | 0.5 ms ON to OFF / OFF to ON |
Backplane Bus Communication Velocity and Firmware Compatibility
The internal transistor switching architecture interfaces directly with the Series 90-30 rack backplane, transferring discrete status bits without reducing backplane bus communication velocity during high-density I/O scan cycles. Integrated optical isolators protect internal controller logic against voltage spikes and noise generated on field wiring lines. Full firmware flash compatibility across Series 90-30 CPU models ensures consistent register updating, real-time channel status LED mapping, and execution of fast-cycling output commands.
Frequently Asked Questions
Q: What are the primary electrical load limitations for each channel on the IC693MDL752F?
A: Each output channel supports a maximum continuous load current of 0.5 A at 30 VDC, while the combined load for each 16-point group common must not exceed 8 A.
Q: Does the IC693MDL752F require separate external power supplies for each output group?
A: Yes, because the module contains two electrically isolated groups of 16 points, each group requires its own external 12/24 VDC field power connection across its respective common terminal.
Field Installation Guidelines
Turn off all panel power before seating or removing the IC693MDL752F module from the Series 90-30 rack baseplate. Align the module card with the target slot rails, pushing firmly until the rear backplane connectors lock completely. Wire external 12/24 VDC power and field loads to the removable terminal block using copper conductors rated for panel ambient temperatures. Maintain physical separation between DC output control wiring and high-voltage AC lines to minimize inductive noise interference on logic signals.