DS200PCCAGGACB General Electric Mark V Power Connect Interface Card
Manufacturer: GE Fanuc
-
Part Number: DS200PCCAGGACB
Condition：New with Original Package
Product Type: Power Connect Cards
-
Country of Origin: USA
Payment:T/T, Western Union
Shipping port: Xiamen
Warranty: 12 months
General Electric DS200PCCAGGACB Mark V Power Connect Interface Board
Configured for power bridge interface and signal management in Mark V turbine control platforms, the General Electric DS200PCCAGGACB (DS200PCCAGGACB Power Connect Interface Board) provides direct physical/electrical execution for interconnecting control circuitry with SCR power bridges.
Suffix Breakdown & Model Matrix
The DS200PCCAGGACB alphanumeric designation corresponds directly to functional hardware engineering revisions within the GE Speedtronic platform architecture:
- DS200: Standard GE Speedtronic board class and base platform designator.
- PCCA: Power Connect Card functional hardware circuit topology.
- G00: Base design variant level.
- GGA: Functional circuit revision identifier.
- CB: Artwork layout modification revision code.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | DS200PCCAGGACB |
| Brand | General Electric |
| Origin | USA |
| Weight | 1.13 kg |
| Dimensions | 267 mm x 216 mm x 38 mm |
| Operating Temp | -30 deg C to +70 deg C |
| Storage Temp | -40 deg C to +85 deg C |
| Power Consumption | 5 W maximum |
| System Backplane Power Rails | 5 VDC, 24 VDC, 125 VDC |
| Digital I/O Paths | 48 channels for discrete signal routing |
| Analog Signal Paths | 16 channels for analog interconnection |
| Electrical Isolation | 1500 V between power and signal circuits |
| Communication Protocol | Modbus TCP/IP |
| Connector Types | High-density ribbon cable connectors, terminal blocks |
Industrial Control Backplane & Deterministic Networking
The General Electric DS200PCCAGGACB connects control circuitry directly to high-power Silicon Controlled Rectifier (SCR) bridges through dedicated low-latency trace paths. The board integrates determinism across internal backplane bus channels, allowing synchronized transmission of firing angle triggers and power feedback across 48 discrete and 16 analog interconnect paths.
The onboard Modbus TCP/IP communication logic enables high-speed status monitoring over deterministic networks without compromising real-time execution. Channel-to-channel signal routing relies on high-density ribbon cables and terminal interfaces, maintained under a strict firmware flash compatibility framework that verifies hardware revisions before allowing high-voltage SCR gating execution.
Frequently Asked Questions
Q: How does the module handle backplane power delivery across different voltage levels?
A: The board receives 5 VDC, 24 VDC, and 125 VDC directly from the system backplane, utilizing onboard filtering networks to supply stable power to digital logic and field devices while maintaining 1500 V electrical isolation.
Q: Can the DS200PCCAGGACB board be replaced while the system is powered?
A: No, hot-swapping this card is strictly prohibited. Technicians must de-energize the cabinet power rails and isolate the SCR power bridge prior to hardware replacement to prevent arc flash hazards and firmware execution faults.
Q: What prevents signal interference between high-voltage power paths and low-voltage control circuits?
A: Galvanic isolation barriers rated to 1500 V physically separate the high-power SCR bridge interface logic from sensitive control processors, accompanied by integrated EMI shielding across all high-density ribbon connectors.
Field Installation Guidelines
Mount the board securely into the designated GE Speedtronic Mark V cabinet rack using grounded metal fasteners to establish chassis grounding. Ensure the installation environment remains free of conductive dust and relative humidity condensation.
Connect high-density ribbon cables and discrete terminal blocks firmly, ensuring locking tabs fully engage to prevent pin separation during operational vibration. Verify that shield wires are grounded at a single point to prevent ground loops. Maintain a minimum bending radius for ribbon cabling and route high-voltage SCR gate wiring away from sensitive low-voltage analog lines. Always confirm system power isolation before making or breaking terminal connections.