DSDO115 ABB 3BSE018298R1 Advant OCS Digital Output Board
Manufacturer: ABB
-
Part Number: DSDO115
Condition：New with Original Package
Product Type: Digital Output Modules
-
Country of Origin: Sweden
Payment:T/T, Western Union
Shipping port: Xiamen
Warranty: 12 months
ABB DSDO115 Digital Output Board
The ABB DSDO115 3BSE018298R1, also cataloged as the DSDO115 Digital Output Module, operates as a dedicated hardware component for discrete signal switching within ABB Advant OCS and Symphony Harmony DCS platforms.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | DSDO115 (Product ID: 3BSE018298R1) |
| Brand | ABB |
| Origin | Sweden |
| Weight | 0.50 kg |
| Dimensions | Euro-card format (Standard Rack Size) |
| Operating Temp | -25 to +70 deg C |
| Power Consumption | ~5 W (Backplane bus supply load) |
| Output Capacity | 32 discrete digital outputs |
| Output Voltage | 24 VDC |
| Channel Rating | 0.5 A per channel |
| Galvanic Isolation | System bus to output channel isolation |
| On-Board Diagnostics | Short-circuit and open-circuit loop detection |
| Physical Protection | IP20 |
| Mounting Format | Subrack / Euro-card chassis installation |
Backplane Bus Communication Velocity & I/O Density Scaling
The ABB DSDO115 executes deterministic command updates by converting digital logic signals into physical 24 VDC output states across 32 individual channels. Internal backplane bus logic processes write cycles directly from the main processor, preserving bus communication velocity and preventing transmission latencies during high-density switching routines. Firmware flash compatibility within the Advant OCS and Symphony Harmony environments enables real-time monitoring of output health. The board isolates system-side processor circuits from field disturbances via galvanic barrier interfaces, while built-in detection circuits constantly evaluate loop continuity for short-circuit or open-circuit faults without interrupting backplane network cycles.
Frequently Asked Questions
Q: How does the DSDO115 board isolate system logic from field-side electrical surges?
A: Integrated galvanic isolation barriers completely separate the backplane logic bus from the 24 VDC output channels, preventing field transients from damaging central processing hardware.
Q: What action occurs when the module detects a short-circuit or open-circuit condition on a channel?
A: The board triggers on-board diagnostic bit registers, updating internal status logs and providing immediate fault indicators across the DCS diagnostics interface to isolate the affected 24 VDC field circuit.
Q: Can the 32 channels on the DSDO115 be hot-swapped within an active subrack?
A: Technicians must ensure that the specific subrack chassis and system architecture support live module removal before extraction, preventing transient backplane bus disruptions during card maintenance.
Field Installation Guidelines
- Slide the Euro-card module into the subrack guide rails until the rear backplane connectors fully seat into the chassis bus receptacle.
- Verify that external 24 VDC field power lines pass through dedicated fusing prior to landing on terminal blocks to protect the 0.5 A channel drivers.
- Route output signal wiring through dedicated cable ducts separate from high-voltage AC lines to prevent induced noise on field coils and solenoids.
- Ensure the control cabinet earth ground bus connects directly to the subrack frame to establish proper shielding and static discharge paths.
- Maintain unhindered airflow across the rack assembly to keep operational ambient temperatures within the designated -25 to +70 deg C envelope.