{"product_id":"emerson-kj2005x1-mq1-mq-controller-module-new-original-stock","title":"Emerson KJ2005X1-MQ1 MQ Controller Module | New \u0026 Original Stock","description":"\u003ch2\u003eEmerson KJ2005X1-MQ1 DeltaV MQ Controller\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eEmerson KJ2005X1-MQ1\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003eKJ2005X1-MQ1\u003c\/strong\u003e MQ Controller, operates as a dedicated hardware component for real-time control strategy execution and data routing within DeltaV distributed control system networks. The device houses an embedded processing unit that executes regulatory control loops, sequential logic, and mathematical algorithms directly at the local architecture layer. Operating as the primary computational node, the module coordinates discrete and analog data streams parsed across the backplane, communicating natively with adjacent I\/O infrastructure to maintain process state stability independent of high-layer supervisory network links.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eKJ2005X1-MQ1 (Alternate Part No: 12P6381X022 \/ VE3008)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eEmerson (DeltaV Series)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.20 kg (1.00 lbs gross)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e13.0 cm x 1.9 cm x 19.1 cm (Chassis bounds: 14.6 cm x 3.3 cm x 13.0 cm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e-40 to 70 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003e1.4 A at 5 VDC internal draw (Total module dissipation up to 12 W)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProcessor Engine\u003c\/td\u003e\n\u003ctd\u003eEmbedded microprocessor with 128 MB SDRAM and 64 MB Flash\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCommunication Ports\u003c\/td\u003e\n\u003ctd\u003eRedundant Ethernet, DeltaV proprietary fieldbus interface\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMechanical Stress Limits\u003c\/td\u003e\n\u003ctd\u003e15 g shock rating, 0.05 g RMS vibration resistance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRelative Humidity\u003c\/td\u003e\n\u003ctd\u003eUp to 95% RH (non-condensing)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInterface Placement\u003c\/td\u003e\n\u003ctd\u003eSecure attachment to dedicated DeltaV controller baseplates\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStandard Compliance\u003c\/td\u003e\n\u003ctd\u003eCE, UL, CSA, IEC 61131-2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eChannel-to-Channel Isolation and Loop Protocol Stability\u003c\/h3\u003e\n\u003cp\u003eThe KJ2005X1-MQ1 system board incorporates high-performance physical barrier fields to secure galvanic and optical channel-to-channel isolation metrics across the baseplate interfaces, neutralizing external ground loop interference and potential shifts. The integrated network subsystem handles multi-protocol data streams, prioritizing safety-critical variables while maintaining clear paths for the secondary 4-20 mA HART loop protocol lines overlaid on the local sub-bus networks. By dampening inductive bus echoes and suppressing high-frequency common-mode noise, the internal communication controller safeguards data validation and prevents timing anomalies from corrupting analog-to-digital scaling tables across the linked I\/O carriers.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: What is the deterministic switching latency when executing a failover between redundant controllers?\u003c\/p\u003e\n\u003cp\u003eA: The hardware architecture executes an automated Bumpless Transfer protocol during an active processor fault. The tracking registers sync memory contents continuously over the local backplane channel, permitting the standby module to assume primary task execution within a single controller scan cycle to prevent control loop drops.\u003c\/p\u003e\n\u003cp\u003eQ: Can the KJ2005X1-MQ1 module be hot-swapped under full control power?\u003c\/p\u003e\n\u003cp\u003eA: Yes. The baseplate mating pins are physically stepped to enable hot-swap installation and extraction on energized DeltaV logic carriers. The logic line ground connections engage first and disengage last, preventing backplane bus noise or address line corruption from destabilizing concurrent processing tasks on adjacent active modules.\u003c\/p\u003e\n\u003cp\u003eQ: How is memory protection maintained during an unexpected loss of the primary 24 VDC external supply line?\u003c\/p\u003e\n\u003cp\u003eA: The controller stores its active runtime image, configuration profiles, and static calibration variables inside an internal non-volatile flash memory segment. Upon detection of an undervoltage condition on the local railbus, internal shutdown logic commits active accumulator states to memory blocks before the processing rails discharge completely.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePress the controller housing straight down onto its matching slot on the DeltaV baseplate assembly, verifying that the physical retention latches snap and lock fully into the guide frame.\u003c\/li\u003e\n\u003cli\u003eVerify that the dual external 24 VDC power lines derive from separate, isolated industrial power sources to prevent a single power supply failure from interrupting both redundant controller modules.\u003c\/li\u003e\n\u003cli\u003eRoute all network communications lines using Category 5e or higher shielded twisted-pair cabling, grounding the collective outer shields exclusively at the central cabinet copper earth bus bar.\u003c\/li\u003e\n\u003cli\u003eVerify that ambient cabinet air migration remains unimpeded by adjacent wire ducts or structural metal shields, maintaining internal convection currents across the full -40 to 70 deg C thermal window.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Emerson","offers":[{"title":"Default Title","offer_id":44240861397091,"sku":"KJ2005X1-MQ1","price":210.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0583\/5246\/8067\/files\/439._9f77203e-d2c1-49f9-bc53-f16e4bfe852e.jpg?v=1780907115","url":"https:\/\/www.autocontrolglobal.com\/products\/emerson-kj2005x1-mq1-mq-controller-module-new-original-stock","provider":"AutoControl Global","version":"1.0","type":"link"}