Emerson VE4003S2B1 KJ4001X1-CA1 Analog Input Module
Manufacturer: Emerson
-
Part Number: VE4003S2B1 KJ4001X1-CA1
Condition：New with Original Package
Product Type: Analog Input Modules
-
Country of Origin: USA
Payment:T/T, Western Union
Shipping port: Xiamen
Warranty: 12 months
Emerson VE4003S2B1 DeltaV Analog Input Controller
Configured for high-accuracy analog signal acquisition and digital conversion in Emerson DeltaV DCS platforms, the Emerson VE4003S2B1, also cataloged as the VE4003S2B1 KJ4001X1-CA1 Analog Input Module, provides direct physical/electrical execution.
Suffix Breakdown & Model Matrix
| Base Model | Assembly Part Number | Module Classification | Enclosure & Form Factor |
|---|---|---|---|
| VE4003S2B1 | KJ4001X1-CA1 | DeltaV Analog Input Card | Carrier-mounted DIN-rail module |
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | VE4003S2B1 KJ4001X1-CA1 |
| Brand | Emerson |
| Origin | USA |
| Weight | 0.20 kg |
| Dimensions | 107 x 41 x 105 mm |
| Operating Temp | -40 to +70 deg C |
| Power Consumption | 250 VAC, 60 VDC @ 1 A per channel rating |
| System Compatibility | Emerson DeltaV DCS |
| Signal Conversion | Field Analog Transmitter to Digital Data |
| Humidity Range | 5% to 95% non-condensing |
| Shock Resistance | 10 g half-sine wave for 11 ms |
| Vibration Resistance | 1 mm P-P (2-13.2 Hz), 0.7 g (13.2-150 Hz) |
| Hazardous Approvals | ATEX, IECEx, FM, UKEX (Zone 2, Class I Div. 2) |
4-20 mA HART Loop Protocol & Isolated Channel Execution
The module incorporates robust channel-to-channel functional isolation and dedicated signal conditioning circuitry to interface directly with process field transmitters. Utilizing standard 4-20 mA loop topology, the hardware digitizes incoming analog process variables while mitigating ground loop noise interference. Furthermore, integrated cold junction compensation (CJC) capabilities and high-resolution analog-to-digital processing ensure signal stability across extreme environmental shifts without corrupting backplane communication frames.
Frequently Asked Questions
Q: Does the module support continuous hot-swapping during active backplane operation?
A: Yes, operators can remove and insert the hardware directly into an energized DeltaV I/O carrier without interrupting power or signal communication on adjacent backplane channels.
Q: How does channel-to-channel isolation protect the system against field faults?
A: Galvanic and functional channel isolation prevents high-voltage transients or field wiring ground loops on a single channel from degrading neighboring input channels or damaging the internal DCS backplane.
Field Installation Guidelines
Mount the unit vertically onto the designated DeltaV carrier slot until the locking mechanism fully engages. Wire all field loops using twisted-shielded pair cables, terminating the individual drain wires directly to the designated field wiring terminal block shield connections. Maintain a minimum engagement of 5 full threads on all NPT conduit fittings leading into the local junction enclosure to preserve hazardous location ratings. Route field instrument wiring separately from high-voltage AC power lines to avoid electromagnetic induction noise.