Emerson VE4005S2B3 DeltaV S-Series 8-Channel Analog Output Module
Manufacturer: Emerson
-
Part Number: VE4005S2B3
Condition：New with Original Package
Product Type: Analog Output Modules
-
Country of Origin: USA
Payment:T/T, Western Union
Shipping port: Xiamen
Warranty: 12 months
Emerson VE4005S2B3 Analog Output Module
Configured for precision process control within DeltaV S-Series systems, the Emerson VE4005S2B3 (VE4005S2B3 Analog Output Module) provides direct physical and electrical execution of 4–20 mA signals integrated with HART communication protocols for smart field devices.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | VE4005S2B3 (KJ3221X1-BA1) |
| Brand | Emerson |
| Origin | China |
| Weight | Not specified |
| Dimensions | Standard DeltaV S-Series I/O carrier form factor |
| Operating Temp | -40 deg C to +70 deg C |
| Power Consumption | 12 VDC @ 150 mA (Local Bus); 24 VDC @ 300 mA (Bussed Field) |
| Output Channels | 8 analog outputs |
| Signal Type | 4–20 mA DC with HART |
Channel-to-channel isolation
The VE4005S2B3 utilizes advanced channel-to-channel isolation to ensure that field-side ground loops or electrical surges in one control loop do not affect adjacent channels. This isolation barrier maintains the signal integrity of the 4–20 mA HART output, preventing common-mode interference from degrading process variable control. The internal circuitry supports HART versions 5, 6, and 7, allowing for bidirectional digital communication with field transmitters and actuators. The module further protects against chemical and moisture ingress through a factory-applied conformal coating, ensuring consistent performance in environments rated up to ISA-S71.04-1985 Class G3.
Frequently Asked Questions
Q: Does the VE4005S2B3 support hot-swapping in a redundant pair configuration?
A: Yes, the module is engineered for hot-swapping. When configured as part of a redundant pair, the module can be removed or replaced under power without interrupting the control signal to the field devices, provided the I/O carrier supports the redundant backplane architecture.
Q: How does the module handle HART communication transparency?
A: The module acts as a transparent gateway for HART data. The DeltaV controller communicates with the smart field device directly through the VE4005S2B3, allowing the engineering station to perform remote configuration and diagnostics without affecting the analog 4–20 mA control signal.
Field Installation Guidelines
- Carrier Preparation: Before installing the VE4005S2B3, ensure the I/O carrier is powered and the appropriate rotary keying (mechanical block) is installed on the terminal block to match the module’s configuration.
- Termination: Utilize the 16-pin mass termination block for field wiring. Ensure all conductors are stripped to the required length and securely fastened to prevent high-resistance connections that could introduce loop noise.
- Shielding: Always connect signal cable shields to the carrier ground bar. Effective shielding is mandatory to preserve the precision of the analog signal and to maintain HART communication reliability in high-EMI environments.
- Validation: Upon insertion, allow the DeltaV controller to automatically detect and register the module. Verify the output loop health through the software interface by checking for loop continuity and confirming the absence of diagnostic error flags.