Energy Pack Module GE IC695ACC412-AA PACSystems RX3i
Manufacturer: GE Fanuc
-
Part Number: IC695ACC412-AA
Condition：New with Original Package
Product Type: PLC Accessories
-
Country of Origin: USA
Payment:T/T, Western Union
Shipping port: Xiamen
Warranty: 12 months
GE IC695ACC412-AA RX3i PACSystems Cap Pack Module
The GE IC695ACC412-AA, also cataloged as the IC695ACC412 Cap Pack Module, operates as a dedicated hardware component for temporary hold-up power and memory retention within PACSystems RX3i platforms. Mountable via DIN rail or directly on the CPU frame, the module interfaces through a dedicated controller interconnect cable to supply auxiliary energy during unexpected main bus power interruptions. This configuration preserves internal system memory and allows orderly system state retention before total voltage decay occurs across the backplane.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | IC695ACC412-AA |
| Brand | GE |
| Origin | United States |
| Weight | 0.31 kg (0.69 lbs) |
| Dimensions | 50 mm x 35 mm x 15 mm |
| Operating Temp | 0 to 60 deg C |
| Power Consumption | Passive storage (Capacitor/Battery energy pack assembly) |
| System Line | PACSystems RX3i |
| Mounting Type | DIN rail or top-module frame mounting |
| Status Indicator | 1 green STAT LED |
| Interconnect Cable | 1 m controller interface cable |
| Ingress Protection | IP20 / Pollution Degree 2 |
Backplane Bus Communication and Firmware Flash Compatibility
The IC695ACC412-AA coordinates voltage hold-up sequences directly with RX3i CPU processors to maintain backplane bus communication velocity during power loss events. Internal energy-storage circuits provide steady retention voltage across non-volatile logic structures, preventing bit corruption or watchdog faults. Firmware flash compatibility across the RX3i platform ensures that the controller recognizes energy pack status signals via the 1 m interconnect cable, updating the green STAT LED status indicator to reflect active charge capability without consuming main backplane power.
Frequently Asked Questions
Q: How is the IC695ACC412-AA attached to an RX3i controller or system rack?
A: The energy pack mounts on a standard 35 mm DIN rail or snaps directly onto the top of the compatible RX3i CPU module, connecting electrically via its 1 m interface cable.
Q: What clearance distance is required around the module housing during field mounting?
A: Maintain a minimum heat dissipation clearance of 25 mm (1 inch) around all sides of the enclosure to ensure proper convection cooling within IP20 / Pollution Degree 2 control panels.
Q: How does a field operator verify operational readiness of the IC695ACC412-AA module?
A: Monitor the single green STAT LED on the front faceplate; a solid illuminated LED indicates that internal storage cells are fully charged and ready to support memory backup cycles.
Field Installation Guidelines
Ensure main supply power to the PACSystems RX3i rack is fully isolated before mounting or connecting the IC695ACC412-AA module. Snap the energy pack securely onto a 35 mm DIN rail or mount it directly onto the designated CPU housing tabs, verifying that the mechanical latch locks in place. Maintain at least 25 mm (1 inch) of open thermal clearance above and below the unit to prevent ambient heat buildup.
Plug the 1 m controller interface cable firmly into the dedicated energy pack connector on the CPU faceplate until the side clips lock. Route the interconnect cable away from high-voltage AC lines, relay switching contacts, and variable frequency drive output cables to prevent electromagnetic interference from disrupting internal control logic and diagnostic reporting signals.