Experion PKS Analog Output IOTA | Honeywell CC-TAOX01
Manufacturer: Honeywell
-
Part Number: CC-TAOX01
Condition：New with Original Package
Product Type: Analog Input Modules
-
Country of Origin: USA
Payment:T/T, Western Union
Shipping port: Xiamen
Warranty: 12 months
Honeywell CC-TAOX01 Experion PKS Series C Analog Output IOTA
The Honeywell CC-TAOX01, also cataloged as the CC-TAOX01 (Part Number 51308351-175) Analog Output Input/Output Termination Assembly, operates as a dedicated hardware component for 16-channel analog current signal distribution and field wiring termination within Honeywell Experion PKS Series C distributed control systems.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | CC-TAOX01 / 51308351-175 |
| Brand | Honeywell |
| Origin | USA |
| Weight | 0.27 kg (0.60 lbs) |
| Dimensions | 2.2 cm x 12.4 cm x 12.6 cm |
| Operating Temp | 0 to 60 deg C |
| Power Consumption | 22 to 28 VDC nominal supply loop |
| System Platform | Honeywell Experion PKS Series C |
| Number of Output Channels | 16 channels |
| Output Signal Range | 4-20 mA standard (0 mA, 2.9-21.1 mA settable) |
| Maximum Resistive Load | 800 ohm at 22-28 VDC supply |
| Compliance Voltage | 16 V maximum |
| Compatible Modules | CC-PAOX01, CC-PAOH01 |
| Mounting Type | DIN rail or panel mount |
4-20 mA HART Loop Protocol & Channel Isolation
Engineers integrate the assembly into distributed control loops requiring precise analog signal transmission and robust physical termination. The architecture processes standard 4-20 mA current loops while maintaining channel-to-channel isolation parameters to suppress common-mode voltage fluctuations and ground interference across connected actuators and valve positioners. Cold junction compensation and internal resistance regulation maintain output current linearity within 0.05% of full scale. The assembly provides open-circuit voltage handling up to 22 V and limits output ripple to under 100 mV peak-to-peak across a 250 ohm load.
Frequently Asked Questions
Q: Does the assembly support redundant configuration layouts?
A: No, this specific hardware version is built as a non-redundant termination assembly designed for single-path Experion Series C I/O modules.
Q: How does the assembly maintain output signal accuracy under varying thermal loads?
A: Calibrated accuracy holds within 0.35% of full scale at 25 deg C, with an output temperature drift profile restricted to 0.005% of full scale per deg C.
Field Installation Guidelines
Mount the assembly securely on standard DIN rail or panel plates inside a grounded industrial control enclosure. Maintain adequate vertical spacing above and below the unit to support natural thermal convection up to the 60 deg C operating ceiling. Connect field actuator wiring to the designated screw terminals, ensuring proper loop polarity for the 4-20 mA current signals. Terminate all shielded twisted-pair signal cables to a single earth ground bus bar at the cabinet entry point to prevent electromagnetic interference.