F 2 DO 16 01 HIMA HIMatrix SIL3 16-Channel Digital Output Module
Manufacturer: HIMA
-
Part Number: F2 DO 16 01
Condition：New with Original Package
Product Type: Digital Output Modules
-
Country of Origin: Germany
Payment:T/T, Western Union
Shipping port: Xiamen
Warranty: 12 months
HIMA F2 DO 16 01 HIMatrix Digital Output Module
Configured for current-sinking actuator execution in HIMatrix platforms, the HIMA F2 DO 16 01 (F2 DO 16 Digital Output Module) provides direct physical/electrical execution. The hardware manages 16 independent 24 VDC output channels switching up to 0.5 A per channel for solenoid valves, relays, and indicator lamps. Dual RJ-45 10BASE-T/100BASE-TX Ethernet interfaces with integrated switching process SILworX network commands while onboard diagnostics execute short-circuit and open-load detection across connected field loops.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | F2 DO 16 01 (Base Model: F2 DO 16) |
| Brand | HIMA |
| Origin | Germany |
| Weight | 0.8 kg |
| Dimensions | Standard HIMatrix Module Enclosure |
| Operating Temp | -20 deg C to +60 deg C |
| Power Consumption | 24 VDC supply, idle approx. 0.2 A, max 9 A per group |
| Digital Outputs | 16 channels, current-sinking |
| Output Voltage & Current | 24 VDC, typically 0.5 A per channel |
| Network Interfaces | 2 x RJ-45, 10BASE-T/100BASE-TX with integrated switch |
| Diagnostics | Short-circuit and open-load detection |
| Safety Certification | SIL 3 (IEC 61508) |
| Engineering Tool | SILworX |
| Mounting Type | DIN rail |
SIL3 Certification and Galvanic Isolation Architecture
Operating under strict SIL 3 requirements according to IEC 61508, the module incorporates robust galvanic isolation between field-side output channels and central system processing logic. This separation prevents external voltage surges, short circuits, and ground potential shifts from damaging controller backplane components. During severe network interruptions or internal hardware faults, the module automatically enforces fail-safe state execution, de-energizing output channels to isolate connected process elements within deterministic time frames.
Frequently Asked Questions
Q: How does the module handle output power distribution across its 16 channels?
A: The channel logic divides power routing into supply groups, supporting up to 9 A maximum per group. An idle current draw of approximately 0.2 A maintains internal processing and diagnostic functions when field outputs are inactive.
Q: What action does the module take upon detecting an open-load condition on an active channel?
A: Integrated diagnostic circuitry detects the open-load status and reports the fault flag over the Ethernet interface to SILworX software while signaling the onboard status LED, maintaining active drive state on unaffected channels.
Field Installation Guidelines
Snap the module housing firmly onto a standard 35 mm DIN rail inside the enclosure, ensuring the grounding spring contacts the metallic rail surface cleanly. Wire field devices to terminal blocks using stranded copper conductors, keeping 24 VDC output loads separated from high-voltage AC cabling. Connect Ethernet lines through shielded RJ-45 connectors and ground cable shields at a single chassis point to eliminate noise loops. Ensure ambient operating temperatures stay between -20 deg C and +60 deg C with adequate clearance around the housing to facilitate passive thermal convection.