F-3330 HIMA REV06 Planar4 Safety Digital Output Module
Manufacturer: HIMA
-
Part Number: F3330 REV06
Condition：New with Original Package
Product Type: Digital Output Cards
-
Country of Origin: Germany
Payment:T/T, Western Union
Shipping port: Xiamen
Warranty: 12 months
HIMA F3330 REV06 Planar4 Digital Output Module
Configured for high-reliability digital output execution in Planar4 Safety Instrumented Systems, the HIMA F3330 REV06 (F3330 Digital Output Module) provides direct physical/electrical execution. The 8-channel module drives 24 VDC field loads including solenoid valves, interlock relays, and visual alarms across -25 to +70 deg C operating temperatures. The module limits internal voltage drops to a maximum of 2 V at 500 mA load, utilizing integrated channel short-circuit protection and galvanic isolation to maintain signal integrity without corrupting central backplane communication.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | F3330 REV06 |
| Brand | HIMA |
| Origin | Germany |
| Weight | 0.3 kg |
| Dimensions | 4 TE Width (22.9 x 72.5 mm) |
| Operating Temp | -25 to +70 deg C |
| Power Consumption | 12 W |
| Output Channels | 8 Independent Safety Outputs |
| Nominal Output Voltage | 24 VDC |
| Channel Output Current | 500 mA (Ch 1-3, 5-7); Up to 2 A (Ch 4, 8) |
| Internal Voltage Drop | Max. 2 V at 500 mA |
| Protection & Isolation | Short-Circuit Protection, Galvanic Isolation |
| Enclosure Protection Class | IP65 |
| Safety Integrity Level | SIL 2 (IEC 61508), PLd (EN ISO 13849-1) |
Functional Safety Architecture & Fail-Safe Execution
Certified to IEC 61508 SIL 2 and EN ISO 13849-1 PLd requirements, the module incorporates automatic internal self-testing routines to enforce continuous fail-safe state execution. Galvanic isolation decouples all 8 field switching channels from the internal logic bus, isolating high-voltage transients and preventing ground loops from propagating to the Planar4 rack frame. Dedicated short-circuit protection circuits monitor active loads, instantly isolating fault paths when current thresholds are exceeded on 500 mA or 2 A outputs. Front-panel LED status indicators display real-time channel activity and fault alerts to enable instant diagnostic feedback during process anomalies.
Frequently Asked Questions
Q: How does the short-circuit protection handle high-current loads on channels 4 and 8?
A: Integrated current-limiting monitoring evaluates load resistance in real time, automatically isolating channels 4 or 8 if output current exceeds safe operating thresholds up to 2 A.
Q: Does galvanic isolation protect the Planar4 backplane during a field wiring surge?
A: Yes, galvanic isolation establishes a physical barrier that prevents field-side inductive spikes, ground potential shifts, and shorts from reaching the backplane bus.
Field Installation Guidelines
Mount the 4 TE module vertically into its assigned Planar4 rack enclosure position, securing all retention screws to establish frame earth grounding. Ensure all field output wiring for 24 VDC inductive loads—such as solenoids and relays—is routed using shielded twisted-pair cables with single-point shielding grounded at the cabinet entry terminal. Maintain adequate ventilation clearance within the IP65 enclosure to properly dissipate the 12 W power consumption across the -25 to +70 deg C operating range.