Foxboro FBM232 P0926GW I/A Series Ethernet Communication FBM
Manufacturer: Foxboro
-
Part Number: P0926GW
Condition：New with Original Package
Product Type: Ethernet Communication Fieldbus Modules
-
Country of Origin: USA
Payment:T/T, Western Union
Shipping port: Xiamen
Warranty: 12 months
Foxboro FBM232 P0926GW Ethernet Communication Module
The Foxboro FBM232 P0926GW, also cataloged as the FBM232 Ethernet Communication FBM, operates as a dedicated hardware component for deterministic TCP/IP data exchange within Foxboro I/A Series and Evo DCS networks. Mounted directly onto compatible system baseplates via dual 48-pin backplane connectors, the module routes 10/100 Mbps Ethernet traffic between field control processors and plant-level management systems. Onboard microprocessor logic handles network protocol conversion while maintaining galvanic isolation across the backplane interface.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | FBM232 (P0926GW) |
| Brand | Foxboro |
| Origin | USA |
| Weight | 0.36 kg (0.80 lbs) |
| Dimensions | Standard Single-Width FBM Form Factor |
| Operating Temp | 0 deg C to +60 deg C |
| Storage Temp | -40 deg C to +85 deg C |
| Power Consumption | Baseplate bus powered |
| Product Type | Ethernet Communication Fieldbus Modules |
| Network Speed | 10/100 Mbps Ethernet |
| Communication Protocols | TCP/IP (system-integrated) |
| Connector Type | Dual 48-pin high-density backplane connectors |
| Status Indication | Front panel LEDs for power, module health, and network activity |
| System Compatibility | Foxboro I/A Series / Evo DCS |
| Mounting | Baseplate-mounted FBM slot |
| Compliance | IEC standards, CE conformity |
Channel-to-Channel Isolation and 4-20 mA HART Coexistence
The Foxboro FBM232 P0926GW utilizes integrated galvanic isolation barriers to isolate high-speed Ethernet communication buses from baseplate power distribution lines and neighboring I/O signals. This structural isolation blocks electrical transients and eliminates ground loop noise that could otherwise distort adjacent 4-20 mA HART loop protocol signals or thermocouple cold junction compensation (CJC) reference paths on shared baseplates. Furthermore, the internal Ethernet controller limits signal crosstalk, maintaining continuous data packet integrity across noisy industrial control enclosures.
Frequently Asked Questions
Q: Does the FBM232 P0926GW module require an external power supply connection?
A: No, the module draws operating power directly from the 24 VDC backplane power bus through its dual 48-pin rear connectors upon insertion into the baseplate slot.
Q: Can the FBM232 P0926GW be replaced while the system baseplate remains powered?
A: Yes, the module supports live hot-swapping. You can remove or insert the FBM232 without disturbing adjacent I/O module operations or disrupting power distribution across the baseplate.
Q: How do the front-panel status LEDs assist in operational diagnostic validation?
A: The LEDs provide immediate indication of module operational state, internal self-diagnostic status, and active Ethernet link and traffic activity across the communication interface.
Field Installation Guidelines
Align the FBM232 P0926GW guide rails with the target baseplate slot and slide the module firmly into place until the dual 48-pin connectors seat completely into the backplane receptacle. Tighten the top and bottom captive retaining screws to secure the module mechanically and ensure continuous ground contact with the baseplate frame. Verify that cabinet ventilation maintains operating ambient temperatures between 0 deg C and +60 deg C.
Route external Ethernet network cables using shielded twisted-pair (STP) wiring, keeping network lines separated from high-voltage AC cables to prevent electromagnetic interference. Connect all cable shields to a dedicated single-point earth ground rail inside the enclosure. Maintain clean contact surfaces on the baseplate backplane before installation to prevent communication latencies or intermittent interface errors.