GE A860-0372-T00 Modbus TCP/IP Automation Communication Module
Manufacturer: GE Fanuc
-
Part Number: A860-0372-T00
Condition：New with Original Package
Product Type: Communication Modules
-
Country of Origin: USA
Payment:T/T, Western Union
Shipping port: Xiamen
Warranty: 12 months
GE A860-0372-T00 Automation Communication Module
Configured for precise data acquisition and system monitoring in distributed automation networks, the GE A860-0372-T00 (A860-0372-T00 Communication Module) provides direct physical/electrical execution. The unit processes field sensor signals and system diagnostic data, transmitting packets over Modbus TCP/IP networks to host PLCs and DCS platforms. Operating on a 24 VDC nominal power supply, the hardware maintains continuous telemetry execution across an extended operating temperature range from -40 to +70 deg C.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | A860-0372-T00 |
| Brand | GE |
| Origin | USA |
| Weight | 2.5 kg |
| Dimensions | 100 x 80 x 20 mm |
| Operating Temp | -40 to +70 deg C |
| Power Consumption | 24 VDC input supply |
| Module Type | Automation Communication Module |
| Communication Protocol | Modbus TCP/IP |
| Self-Diagnostics | Built-in hardware fault detection |
| Physical Design | Compact ruggedized industrial housing |
Profinet / EtherNet/IP Deterministic Networks & Firmware Flash Compatibility
The GE A860-0372-T00 incorporates onboard protocol processing logic that maintains firmware flash compatibility across legacy and modern control platforms. When integrated alongside Profinet / EtherNet/IP deterministic networks via industrial switch gear, the unit manages Modbus TCP/IP packet queuing without generating network congestion or packet collisions. Onboard hardware diagnostic routines execute continuous memory and link monitoring, immediately flagging transmission faults to the main controller image table.
Frequently Asked Questions
Q: What power wiring guidelines apply when connecting the 24 VDC supply to the A860-0372-T00?
A: Technicians must connect a regulated 24 VDC power source using shielded conductors, ensuring correct polarity and terminating the shield to the central earth ground rail to prevent electrical noise coupling.
Q: How does the internal diagnostic engine communicate hardware faults to the host controller?
A: The module executes continuous background self-tests and sets internal status register flags upon detecting supply voltage fluctuations or communication link errors, which are then read over the Modbus TCP/IP poll cycle.
Q: Is external forced-air cooling necessary when operating the module near its +70 deg C thermal limit?
A: No, the 100 x 80 x 20 mm chassis uses passive thermal dissipation; provided standard enclosure spacing is maintained, additional cooling fans are not required.
Field Installation Guidelines
Mount the module on a standard DIN rail or panel surface within a protective IP54-rated industrial enclosure. Maintain at least 50 mm of vertical clearance above and below the chassis to ensure unobstructed convective cooling across the surface fins.
Connect the 24 VDC supply wiring to the designated power input terminals, confirming secure mechanical contact. Route Ethernet cables carrying Modbus TCP/IP traffic through grounded metallic wireways, keeping them separate from motor power cables and variable frequency drive outputs to avoid electromagnetic signal degradation.