GE DS200ADMAH1AAA Speedtronic Mark V Analog Module
Manufacturer: GE Fanuc
-
Part Number: DS200 ADMAH1AAA
Condition：New with Original Package
Product Type: Analog-to-Digital Modules
-
Country of Origin: USA
Payment:T/T, Western Union
Shipping port: Xiamen
Warranty: 12 months
General Electric DS200ADMAH1AAA Speedtronic Mark V Module
The General Electric DS200ADMAH1AAA, also cataloged as the DS200ADMA Analog-to-Digital Module, operates as a dedicated hardware component for analog signal processing within Mark V Speedtronic control platforms.
Suffix Breakdown & Model Matrix
The DS200ADMA base model specifies the core analog-to-digital interface circuit board architecture. The H1AAA suffix designates the functional hardware iteration and revision tier, where H1 defines the functional circuit layout group and AAA denotes the specific component artwork and manufacturing revision sequence.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | DS200ADMAH1AAA |
| Brand | General Electric |
| Origin | USA |
| Weight | 0.8 kg |
| Dimensions | 120 mm x 100 mm x 20 mm |
| Operating Temp | -20 to +65 deg C |
| Power Consumption | Derived from Mark V backplane (+5 VDC, +-15 VDC) |
| Analog Inputs | 12 channels, +-10 V or 0-20 mA (Jumper-selectable) |
| Analog Outputs | 4 channels, +-10 V or 4-20 mA, 12-bit DAC |
| Digital I/O | 8 channels, 24 VDC, optically isolated |
| ADC Resolution | 16-bit |
| Sampling Rate | Up to 100 kSPS per channel |
| Isolation Voltage | 1500 V AC (channel-to-channel / bus), 2500 V AC (channel-to-ground) |
Backplane Bus Architecture and Signal Conditioning
Engineers design the DS200ADMAH1AAA to interface directly with the DSPC processor motherboard via a 96-pin Euro card edge connector, maintaining VME-DMA parallel bus communication velocity. Onboard CPLD logic offloads processing tasks from the primary CPU by autonomously managing hardware sampling intervals, DMA transfers, and continuous self-test routines. The module applies channel-to-channel isolation to eliminate ground loops and field line noise spikes across dynamic analog loops. Furthermore, automated calibration hardware actively corrects zero-point drift and thermal variance during continuous operational cycles to maintain feedback precision.
Frequently Asked Questions
Q: Does the DS200ADMAH1AAA require manual firmware reprogramming after physical replacement?
A: Hardware installation requires technicians to re-import stored EEPROM parameter files to mirror the prior card's configuration settings and ensure seamless interaction with the DSPC host processor.
Q: How do status LEDs indicate active hardware faults on the module faceplate?
A: The board provides immediate visual feedback through two front-panel indicators: a green IMOK LED signals normal operational status, while a red FAIL LED illuminates upon detection of logic errors or voltage threshold faults.
Field Installation Guidelines
Perform anti-static grounding measures before extracting or seating the module into the card cage assembly. Verify that the 96-pin Euro card edge connector aligns squarely with the DSPC motherboard receptacle to prevent terminal pin deformation. Torque all retention screws to secure the physical mounting frame and ensure solid chassis ground continuity. Following installation, execute a insulation resistance check to verify isolation parameters before restoring system power loops.