GE DS200TCQAG1BB Mark V Common Analog I/O Board
Manufacturer: GE Fanuc
-
Part Number: DS200TCQAG1BB
Condition：New with Original Package
Product Type: Analog I/O Boards
-
Country of Origin: USA
Payment:T/T, Western Union
Shipping port: Xiamen
Warranty: 12 months
GE DS200TCQAG1BB Mark V Common Analog I/O Board
The GE DS200TCQAG1BB, also cataloged as the DS200TCQAG1B Common Analog I/O Board, operates as a dedicated hardware component for analog signal conditioning within Mark V Speedtronic Turbine Control platforms. Configured for routing voltage and current signals between field sensors and control processors, the hardware maintains technical continuity across legacy systems.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | DS200TCQAG1BB (Base: DS200TCQAG1B) |
| Brand | GE |
| Origin | China |
| Weight | 0.25 kg |
| Dimensions | 178 x 101 x 30 mm |
| Operating Temp | -20 to +60 deg C |
| Power Consumption | 5 VDC logic supply requirement |
| Signal Types | +/-5 V, +/-10 V, 4-20 mA |
| Isolation Type | Optocoupler and galvanic isolation |
| Storage Temperature | -40 to +85 deg C |
| PCB Protection | Conformal coating |
| Configuration Hardware | Onboard jumpers for scaling and setup |
| Revision Level | G1BB (backward compatible with G1) |
Industrial Control & Backplane Architecture
The assembly integrates an internal multi-layer PCB topology configured to maintain backplane bus communication velocity Licences and enforce strict firmware flash compatibility across legacy sub-racks. Optocoupler isolation channels decouple discrete analog input and output circuits to eliminate inductive cross-talk and common-mode noise propagation between the central processor and the field infrastructure. Onboard configuration jumpers permit manual hardware scaling to adapt channels between standard voltage and current baselines, while diagnostic LED structures provide direct physical signaling of power and communication loop status metrics.
Frequently Asked Questions
Q: How does the revision level G1BB affect existing system compatibility inside a Mark V panel?
A: The G1BB designation indicates an incremental design update that remains fully backward compatible with earlier G1 baseline boards, requiring no structural alterations to the terminal assemblies.
Q: Is this common analog I/O card hot-swappable during active turbine operations?
A: No, live insertion is prohibited. The 5 VDC logic power supply and external field loops must be completely isolated before extracting the unit to prevent data bus corruption or physical board damage.
Q: What physical indicators verify the status of the integrated isolation circuits?
A: Onboard diagnostic LEDs register real-time line states, illuminating to signal correct power delivery and immediate hardware health status directly on the card surface.
Field Installation Guidelines
- Disconnect all primary power entries and check that the host panel chassis is completely de-energized prior to hardware extraction.
- Apply a verified electrostatic discharge (ESD) wrist strap fastened to the cabinet earth ground rail before removing the card from protective packaging.
- Align the physical layout of the configuration jumpers on the new G1BB assembly to match the exact positions used on the active module being replaced.
- Insert the board card-edge connectors straight into the slot guide rails, pressing evenly until the locking points seat completely into the backplane mating block.