GE DS3800HAFA Speedtronic Mark IV Fast Analog Output Board
Manufacturer: GE Fanuc
-
Part Number: DS3800HAFA
Condition：New with Original Package
Product Type: Analog Output Modules
-
Country of Origin: USA
Payment:T/T, Western Union
Shipping port: Xiamen
Warranty: 12 months
General Electric DS3800HAFA Speedtronic Mark IV Module
Configured for rapid-response analog loop control in GE Speedtronic Mark IV turbine control systems, the General Electric DS3800HAFA (DS3800HAFA Analog Amplifier Board) provides direct physical signal execution across turbine actuator circuits.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | DS3800HAFA |
| Brand | General Electric (GE) |
| Origin | USA |
| Weight | 0.12 kg |
| Dimensions | 56 mm x 100 mm x 23 mm |
| Operating Temp | 0 to 60 deg C (Standard industrial: -40 to +85 deg C) |
| Power Consumption | 8.5 W nominal |
| Output Channels | 4 independent analog outputs |
| Output Type | +-10 VDC or 4-20 mA (Jumper-selectable) |
| Drive Capability | Up to 100 mA per channel (voltage mode); 40 mA (current mode) |
| Slew Rate | Greater than 10 V/us (voltage mode) |
| Bandwidth | DC to 10 kHz |
| Resolution | 12-bit |
| Accuracy | +-0.1 percent of full scale at 25 deg C |
| Settling Time | Less than 20 us to 0.1 percent of full scale |
| Galvanic Isolation | 1500 Vrms opto-isolation (logic-to-output) |
Backplane Bus Performance and Signal Conditioning
The DS3800HAFA interfaces directly with the Mark IV system backplane, enforcing deterministic communication loops to avoid control latency. Designed with high channel-to-channel isolation and optimized I/O density scaling, the circuit board processes high-frequency signals without introducing backplane noise or thermal drift. The board features dedicated driver topology to maintain firmware flash compatibility and real-time execution across closed-loop valve positioning networks. High-density circuitry coupled with an integrated heat sink ensures continuous thermal dissipation during peak load operation in dense rack assemblies.
Frequently Asked Questions
Q: How do operators change individual channel output configurations on the DS3800HAFA?
A: Engineers adjust output modes between +-10 VDC and 4-20 mA by changing physical jumper blocks located adjacent to each channel driver circuit on the printed circuit board prior to rack insertion.
Q: What isolation protection exists between the backplane logic and external field wiring?
A: Optical isolators provide up to 1500 Vrms isolation, preventing field line voltage surges and ground loops from damaging the core backplane processors.
Field Installation Guidelines
Ensure total backplane power termination prior to inserting or removing the module from the Speedtronic card rack to avoid edge-connector arcing. Secure the module housing within the card guide alignment tracks to prevent pins from bending during installation. Ground all field signal cable shields at a single point on the enclosure chassis ground bar using standard 360-degree clamp connections. Maintain at least 50 mm clearance around the heat sink to facilitate unhindered convective cooling through the rack panel.