GE F650BABF2G1HI Multilin Feeder Bay Controller Relay
Manufacturer: GE Fanuc
-
Part Number: F650BABF2G1HI
Condition：New with Original Package
Product Type: Digital Feeder Relays
-
Country of Origin: USA
Payment:T/T, Western Union
Shipping port: Xiamen
Warranty: 12 months
GE F650BABF2G1HI Multilin Series Digital Feeder Relay
The GE F650BABF2G1HI, also cataloged as the GE F650 Digital Feeder Relay, operates as a dedicated hardware component for line protection, arc flash mitigation, and adaptive reclosing within 6.6 kV - 38 kV feeder distribution networks.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | F650BABF2G1HI |
| Brand | GE |
| Origin | USA |
| Weight | Standard SR series withdrawable case allocation |
| Dimensions | Standard SR series withdrawable dimensions |
| Operating Temp | -40 to +70 deg C |
| Power Consumption | Universal power supply range dependent |
| Power Supply | 24-250 VDC / 48-240 VAC universal range |
| Protection Functions | Directional overcurrent (phase, ground, negative sequence), ground fault, arc flash, breaker failure, under/over voltage, frequency protection |
| Inputs/Outputs | Multiple CT and VT inputs, configurable digital inputs and outputs |
| Communication Protocols | IEC 61850, Modbus, DNP3, RS485, Ethernet TCP/IP |
| Monitoring | Event recording, oscillography, disturbance analysis, fault location identification |
| Mounting | Standard SR series withdrawable case installation |
| Certifications | IEC, ANSI, CE, UL compliance |
Industrial Control Backplane and Deterministic Network Coupling
The F650BABF2G1HI executes protective relaying algorithms via an integrated modular framework designed to handle high-density analog voltage and current inputs. The unit supports Profinet / EtherNet/IP deterministic networks and native IEC 61850 protocol stack structures to minimize loop communication latencies across substations. This electronic hardware maintains constant firmware flash compatibility with upstream automation platforms, driving local I/O density scaling routines to operate breaker control loops and load shedding logic instantly when field limits are breached.
Frequently Asked Questions
Q: What type of feeders is the F650 relay suitable for?
A: The physical CT and VT input paths match grid distribution parameters spanning medium- and high-voltage networks from 6.6 kV up to 38 kV.
Q: Which communication protocols are supported?
A: The processor runs simultaneous communication stacks over physical RS485 and Ethernet TCP/IP layers, supporting native IEC 61850, Modbus, and DNP3.
Q: Can this unit handle arc flash protection directly?
A: The internal processing architecture integrates specialized high-speed optical input validation circuits to execute arc flash mitigation routines within milliseconds.
Field Installation Guidelines
- Withdrawable Case Insertion: Align the outer chassis rails with the standard SR series rack enclosure. Slide the module horizontally until the rear terminal blocks mate completely with the cabinet backplane sockets. Secure all front panel latching mechanisms to guarantee mechanical retention and continuous electrical grounding.
- CT and VT Circuit Wiring: Route high-precision current transformer and voltage transformer secondary circuits using thick-gauge stranded conductors. Ensure all CT wiring circuits remain completely shorted before decoupling the module block during online maintenance.
- Shield Grounding and Segregation: Terminate network communication cables (RS485/Ethernet) away from heavy current distribution power buses inside the cable entries. Ground the overall drain wire of the signal cables at the designated primary copper ground bar within the enclosure.