GE Fanuc IC200ALG325D VersaMax Analog Output Module
Manufacturer: GE Fanuc
-
Part Number: IC200ALG325D
Condition：New with Original Package
Product Type: Analog Output Modules
-
Country of Origin: USA
Payment:T/T, Western Union
Shipping port: Xiamen
Warranty: 12 months
GE Fanuc IC200ALG325 VersaMax Analog Output Module
The GE Fanuc IC200ALG325D, also cataloged as the IC200ALG325 Analog Output Module, operates as a dedicated hardware component for converting digital control logic into analog field signals within GE Fanuc VersaMax PLC systems. Utilizing an internal digital-to-analog conversion circuit with 13-bit resolution, the unit drives 8 single-ended output channels across an operating voltage window of 18 to 30 VDC. Optical isolation barriers maintain continuous electrical separation up to 250 VAC between field-side connections and the internal logic backplane, executing signal refreshes across all active channels within a maximum update rate of 10 ms.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | IC200ALG325D |
| Brand | GE Fanuc / Emerson |
| Origin | USA / Assembled globally |
| Weight | 0.28 kg (0.63 lbs) |
| Dimensions | 120 mm x 90 mm x 50 mm |
| Operating Temp | 0 to 60 deg C |
| Power Consumption | 50 mA max at 5 VDC (backplane current draw) |
| Output Channels | 8 single-ended channels |
| Operating Voltage | 18 to 30 VDC |
| Output Resolution | 13 bits |
| Module Update Rate | 10 ms maximum |
| Isolation Voltage | 250 VAC continuous; 1500 VAC for 1 minute |
| Status Indicators | 2 LED diagnostic indicators |
Backplane Bus Communication Velocity & I/O Density Scaling
The IC200ALG325D module transfers digital register data across the VersaMax high-speed backplane, executing signal processing without compromising total backplane bus communication velocity. Featuring an optimized low backplane current draw of 50 mA at 5 VDC, the assembly allows control engineers to scale local I/O density across multi-rack topologies without overloading system power supplies. Furthermore, full firmware flash compatibility ensures transparent data exchange across both vintage GE Fanuc CPUs and contemporary Emerson automation nodes.
Frequently Asked Questions
Q: How does the IC200ALG325D respond if backplane communications experience an unexpected disruption?
A: The module incorporates configurable output default states, allowing system integrators to pre-set individual channels to hold their last known state or transition to a designated baseline value upon detecting a backplane fault.
Q: Is external power required to operate the analog output loops on the IC200ALG325D?
A: Yes, the module logic draws 50 mA from the internal 5 VDC backplane rail, but the analog output stage requires an external field power supply operating within 18 to 30 VDC.
Q: What level of electrical isolation protects backplane logic from field-side transients?
A: Integrated isolation barriers provide galvanic separation rated for 250 VAC continuous and up to 1500 VAC tested for 1 minute between field terminals and the logic backplane.
Field Installation Guidelines
Mount the VersaMax carrier base securely onto a standard 35 mm DIN rail or attach it directly to an enclosure backplate using mounting hardware. Align the IC200ALG325D module with the carrier guide channels and apply firm downward pressure until the retention clips snap into position. Wire field field devices to the removable terminal block using 18-22 AWG shielded twisted-pair conductors to suppress electro-magnetic noise coupling. Maintain a physical separation of at least 300 mm between low-level analog wiring and high-voltage AC conductors. Terminate all cable shield drain wires at a single point on the enclosure low-impedance earth ground bar, and verify ambient cabinet temperatures remain between 0 and 60 deg C during operation.