GE Fanuc IC200PWR002G Expanded Power Supply Module
Manufacturer: GE Fanuc
-
Part Number: IC200PWR002G
Condition：New with Original Package
Product Type: Power Supply Modules
-
Country of Origin: USA
Payment:T/T, Western Union
Shipping port: Xiamen
Warranty: 12 months
GE IC200PWR002G VersaMax Expanded Power Supply Module
Configured for backplane logic power distribution in VersaMax PLC networks, the GE IC200PWR002G (IC200PWR002 VersaMax Expanded Power Supply Module) provides direct physical/electrical execution.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | IC200PWR002G |
| Brand | GE Fanuc |
| Origin | USA |
| Weight | 0.12 kg (Shipping weight 2.0 kg) |
| Dimensions | 49 mm W x 133.4 mm H x 39 mm D |
| Operating Temp | 0 to 60 deg C |
| Power Consumption | 11 W input power |
| Input Voltage Range | 18 to 30 VDC (24 VDC nominal) |
| Output Voltage | 3.3 VDC and 5 VDC backplane supply |
| Total Output Current | 1.5 A maximum |
| 3.3V Output Current | 0.25 A maximum (Up to 1.0 A depending on load configuration) |
| 5V Output Current | 1.5 A minus 3.3V output current draw |
| Inrush Current | 20 A at 24 VDC (6 ms), 25 A at 30 VDC (6 ms) |
| Hold-up Time | 10 ms |
| Isolation | 250 VAC continuous; 1500 VAC for 1 min (field-to-logic/frame ground) |
| Mounting | DIN rail or panel mount via expansion carrier |
| Protection Features | Short circuit, overload, reverse polarity |
| Status Indicators | 1 green PWR LED |
| Terminal Block | 5 screw-clamp terminals (DC+, DC-, GND, 2 unused) |
| Humidity | 5% to 95% (non-condensing) |
| Certifications | UL, CE, CSA, Class I Div 2 Groups A-D, Class 1 Zone 2 |
Backplane Bus Communication Velocity and System Architecture
The IC200PWR002G integrates directly with the VersaMax backplane bus architecture, ensuring regulated voltage rails feed all connected CPU, NIU, and local I/O modules without voltage sag. Maintain deterministic communication velocity across extended racks by placing booster supplies wherever backplane current budgets exceed local capacity. Furthermore, the unit supports hot-swap operations during continuous system run-states while preserving firmware flash compatibility across legacy and modern VersaMax platforms.
Frequently Asked Questions
Q: How is the total 1.5 A output current budget split between the 3.3 VDC and 5 VDC rails?
A: The total combined output current must not exceed 1.5 A. The 5 VDC rail current capacity equals 1.5 A minus the current drawn by the 3.3 VDC rail.
Q: Does the IC200PWR002G module support hot-swapping during active operation?
A: Yes. The module features integrated hot-swap execution capability, permitting field replacement without requiring system shutdown or power isolation of adjacent backplane carriers.
Q: What are the strict grounding requirements for the DC input terminals?
A: The DC- terminal must connect directly to frame earth ground. Floating power configurations are unapproved because single-point isolation testing rates the field-to-logic interface at 1500 VAC for 1 minute.
Field Installation Guidelines
Mount the unit on a standard 35 mm DIN rail or panel base. Secure all 24 VDC power connections using the 5-point screw-clamp terminal block, ensuring that DC- ties directly to cabinet frame ground. Maintain proper spacing to allow natural convection cooling across the housing, and verify that the total backplane current load of downstream I/O modules remains below the 1.5 A maximum output rating.