GE Fanuc IC200UDR005-BF VersaMax Micro 28 Point PLC Controller
Manufacturer: GE Fanuc
-
Part Number: IC200UDR005-BF
Condition：New with Original Package
Product Type: Micro PLCs
-
Country of Origin: USA
Payment:T/T, Western Union
Shipping port: Xiamen
Warranty: 12 months
GE IC200UDR005-BF VersaMax Micro PLC
The GE IC200UDR005-BF, also cataloged as the IC200UDR005 Micro Programmable Logic Controller (PLC), operates as a dedicated hardware component for 28-point discrete signal processing and field actuator control within GE Fanuc VersaMax Micro automation platforms. It integrates a 32-bit microprocessor, 120/240 VAC power supply, 16 sourcing 24 VDC inputs, and 12 outputs (11 relay outputs and 1 DC output) into a single chassis. Communication occurs over dual onboard ports running Modbus RTU, SNP, and SNPx protocols to interface with supervisory hardware and distributed sub-racks.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | IC200UDR005-BF / IC200UDR005 |
| Brand | GE (GE Fanuc) |
| Origin | USA |
| Weight | 0.45 kg (1.00 lbs) |
| Dimensions | 90 x 150 x 60 mm |
| Operating Temp | 0 to 60 deg C |
| Power Consumption | 26 VA (at 120/240 VAC input) |
| Processor Type | 32-bit microprocessor |
| Memory Capacity | 9K words logic memory, 2K words register memory |
| Integrated Inputs | 16 discrete inputs (24 VDC sourcing) |
| Integrated Outputs | 11 relay outputs (2 A per point), 1 DC output (24 VDC) |
| System Expansion | Up to 140 points via VersaMax expansion modules |
| Serial Interfaces | Port 1: RJ-45 (RS-232); Port 2: DB-15 (RS-485) |
| Potentiometers | 2 onboard analog adjustment potentiometers |
Backplane Bus Communication Velocity and Firmware Compatibility
The controller executes deterministic logic cycles while managing real-time data flow across the local rack expansion bus. Internal bus arbitration maintains constant backplane bus communication velocity when interfacing with external expansion I/O modules up to the 140-point maximum limit. Native firmware flash compatibility guarantees deterministic handshaking over RS-232 and RS-485 serial links across Profinet and EtherNet/IP deterministic networks, enabling unbuffered register exchanges between local user memory and host supervisory platforms without introducing cycle execution latencies.
Frequently Asked Questions
Q: Can the IC200UDR005-BF controller firmware be updated via its serial interfaces?
A: Firmware updates transfer through Port 1 (RS-232) or Port 2 (RS-485) using Proficy Machine Edition or VersaPro programming tools while the CPU is set to stop mode.
Q: What power source supplies the integrated digital input channels?
A: The 16 digital inputs require an external 24 VDC power supply to energize field contact loops, as the internal 120/240 VAC supply powers only the internal logic CPU and relay coils.
Q: How do the onboard analog adjustment potentiometers interface with the PLC memory?
A: The two onboard potentiometers write 8-bit digital values directly to dedicated system registers, enabling real-time manual tuning of timer, counter, or setpoint parameters without software modification.
Field Installation Guidelines
Follow these sequential steps during panel mounting and electrical connection:
- Isolate primary 120/240 VAC supply circuits and lock out all external 24 VDC field power sources prior to physical installation.
- Secure the controller housing onto a standard 35 mm DIN rail or bolt it directly to the enclosure mounting plate using the integrated mounting holes.
- Connect line, neutral, and protective earth conductors to the AC power terminal block, ensuring compliance with local wiring codes.
- Route discrete input and relay output wiring through dedicated channels separated from communication cables and AC power conductors.
- Ground all RS-485 serial cable shields to the main enclosure ground bar using low-impedance copper straps to minimize electrical noise interference.