GE Fanuc IC200UDR064 VersaMax Micro PLC Controller
Manufacturer: GE Fanuc
-
Part Number: IC200UDR064
Condition：New with Original Package
Product Type: Compact Programmable Logic Controllers
-
Country of Origin: USA
Payment:T/T, Western Union
Shipping port: Xiamen
Warranty: 12 months
GE IC200UDR064 VersaMax Micro PLC
The GE IC200UDR064, also cataloged as the IC200UDR064-DH Compact Programmable Logic Controller, operates as a dedicated hardware component for discrete field signal processing and electromechanical relay execution within VersaMax Micro automation networks. The unit processes digital inputs and actuates relay outputs to execute deterministic machine control sequences.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | IC200UDR064 |
| Brand | GE Fanuc / Emerson |
| Origin | USA |
| Weight | 0.91 kg (2.00 lbs) |
| Dimensions | 150 mm W x 76 mm D x 90 mm H |
| Operating Temp | 0 to 60 deg C |
| Power Consumption | 12 W |
| Supply Voltage | 24 VDC (-20% / +25%) |
| Maximum Supply Current | 435 mA (Combined input circuit and external device current) |
| Built-in I/O | 64 points total |
| Digital Inputs | 40 x 24 VDC inputs (Positive/Negative logic, 7 mA typical per point) |
| Relay Outputs | 24 x Form A relay outputs (Normally Open) |
| Output Contact Rating | 2.0 A max per point resistive load (24 VDC or 240 VAC) |
| High-Speed Counters | 4 x Type A (10 kHz max) or 1 x Type A + 1 x Type B |
| PWM Output | 1 channel, max 5 kHz |
| Isolation | 1500 V RMS field-to-logic, 500 V RMS between channel groups |
| Memory | 9 KB logic memory, 2 KB register memory |
| Typical Scan Time | 1.1 ms |
| Expansion Capacity | Up to 136 total I/O points via expansion modules |
| Mounting | Standard 35 mm DIN rail or panel mounting |
Backplane Bus Communication and Network Architecture
The IC200UDR064 manages backplane bus communication velocity across attached expansion modules up to the maximum system limit of 136 I/O points. Integrated memory blocks process 9 KB of logic program storage alongside 2 KB of register retention, ensuring complete firmware flash compatibility during updates via VersaPro or Proficy Machine Edition software. The high-density I/O routing architecture coordinates deterministic scan cycles down to 1.1 ms while processing high-speed counter inputs and PWM control signals.
Frequently Asked Questions
Q: What are the maximum voltage and current limits for the integrated relay outputs?
A: Each Form A relay output point handles up to 2.0 A resistive load at 24 VDC or 240 VAC. Inductive loads or higher current requirements demand external interposing relays to prevent contact erosion.
Q: How does the controller isolate internal logic circuitry from field wiring transients?
A: Internal optical isolation barriers provide 1500 V RMS withstand between field-side connections and internal logic components, with an additional 500 V RMS isolation between isolated channel groups.
Field Installation Guidelines
Mount the controller securely on a standard 35 mm DIN rail or fasten it directly to a flat enclosure backplate using mounting screws. Route low-voltage 24 VDC input lines separately from high-voltage AC relay output cables to mitigate inductive noise coupling. Connect the main chassis grounding terminal to the panel earth bus using a short, low-impedance copper strap. Verify that field power supplies do not exceed the 435 mA total current limit when powering auxiliary field devices directly from the module.