GE Fanuc IC693CBL328 Series 90-30 PLC I/O Cable
Manufacturer: GE Fanuc
-
Part Number: IC693CBL328
Condition：New with Original Package
Product Type: PLC Cable Assemblies
-
Country of Origin: USA
Payment:T/T, Western Union
Shipping port: Xiamen
Warranty: 12 months
GE Fanuc IC693CBL328 Series 90-30 I/O Cable Assembly
The GE Fanuc IC693CBL328, also cataloged as the IC693CBL328 I/O Cable Assembly, operates as a dedicated hardware component for high-density discrete and analog signal routing within GE Fanuc Series 90-30 networks.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | IC693CBL328 |
| Brand | GE Fanuc / Emerson Automation |
| Origin | USA |
| Weight | 0.79 kg (1.75 lbs) |
| Dimensions | Cable length: 3 meters (10 feet) |
| Operating Temp | -20 deg C to +60 deg C |
| Power Consumption | Passive cabling assembly (Current rating: 1.2 A per conductor) |
| PLC Connector | Right-angle 24-pin D-connector (Fujitsu FCN-365S024-AU compatible) |
| Field Connector | Flying leads |
| Wire Gauge | 24 AWG solid conductors |
| Compatibility | Series 90-30 16-point and 32-point high-density I/O modules |
| Connector Clearance | 50.8 mm (2.0 in) depth required for right-angle plug |
I/O Density Scaling and Backplane Signal Integrity
The IC693CBL328 cable assembly provides point-to-point physical connection pathways that optimize I/O density scaling across rack-mounted Series 90-30 automation chassis. Featuring a right-angle 24-pin header, this interface reduces spatial depth demands inside control enclosures while maintaining deterministic signal transmission to field terminal blocks. The individual 24 AWG conductors carry up to 1.2 A continuous current per circuit, ensuring reliable voltage throughput for high-density digital input and output points. Furthermore, mechanical keyed connectors prevent pin misalignment during maintenance cycles, protecting backplane bus communication velocity and preventing signal cross-talk across adjacent I/O channels.
Frequently Asked Questions
Q: What advantage does the right-angle 24-pin connector on the IC693CBL328 offer over straight connector cable designs? A: The 90-degree right-angle connector requires only 50.8 mm (2.0 in) of depth clearance, enabling enclosure door closure in narrow panel installations where straight connector models such as the IC693CBL315 would cause mechanical interference.
Q: How are individual field signals identified at the non-terminated end of the IC693CBL328 cable assembly? A: The cable utilizes solid color insulation combined with black tracer lines on individual 24 AWG wires to allow clear identification and termination at field terminal strips or TBQC interface plates.
Q: Can the IC693CBL328 handle high-current inductive field loads directly? A: Each conductor is rated for a maximum current of 1.2 A; loads exceeding this limit require interposing relays to prevent thermal degradation of the wire assembly and connector pins.
Field Installation Guidelines
Route the IC693CBL328 through dedicated cable trunking, maintaining separation from high-voltage AC motor leads to minimize electromagnetic interference. Ensure the minimum bending radius of the cable jacket is maintained throughout panel runs to prevent conductor stress.
When connecting to the PLC side, seat the 24-pin right-angle connector fully into the module header and tighten the retaining screws to guarantee gas-tight electrical contact. Confirm that the 2.0 in connector depth clearance is clear of obstruction from adjacent cabinet hardware.
Terminate the flying-lead end at DIN-rail terminal blocks using insulated ferrules crimped onto each 24 AWG conductor. Connect shield drain wires directly to the cabinet single-point ground bar to maintain signal integrity across field runs.