GE Fanuc IC693CPU363-DK Series 90-30 CPU Processors
Manufacturer: GE Fanuc
-
Part Number: IC693CPU363-DK
Condition：New with Original Package
Product Type: CPU Processors
-
Country of Origin: USA
Payment:T/T, Western Union
Shipping port: Xiamen
Warranty: 12 months
GE Fanuc IC693CPU363-DK Series 90-30 CPU Module
The GE Fanuc IC693CPU363-DK, also cataloged as the IC693CPU363 CPU Module, operates as a dedicated hardware component for central logic processing and multi-protocol communication within GE Fanuc Series 90-30 PLC platforms. Powered by a 25 MHz 32-bit microprocessor with 80 KB program memory and 240 KB register memory, the module executes Boolean logic cycles at a scan rate of 0.22 ms per 1K contacts. The unit manages up to 2,048 discrete I/O points and features an integrated 10/100 Mbps RJ-45 Ethernet port alongside three serial channels for direct deterministic network communication.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | IC693CPU363-DK |
| Brand | GE Fanuc |
| Origin | United States |
| Weight | 0.65 kg (1.44 lbs) |
| Dimensions | 5.0 in x 1.5 in x 5.0 in (12.7 cm x 3.8 cm x 12.7 cm) |
| Operating Temp | 0 deg C to 60 deg C |
| Power Consumption | 1.8 A @ 5 VDC (890 mA base logic draw) |
| Processor | 32-bit Microprocessor, 25 MHz |
| Program Memory | 80 KB user memory |
| Register Memory | 240 KB (%R addressing) |
| Scan Rate | 0.22 ms per 1K Boolean logic |
| Discrete I/O Capacity | 2048 inputs / 2048 outputs |
| Serial Interfaces | 3 ports (SNP/SNPX, Modbus RTU) |
| Ethernet Interface | 1 x RJ-45 (10/100 Mbps; SRTP, Modbus TCP, EGD) |
Backplane Bus Communication & I/O Density Scaling
The central processing unit directly manages backplane bus communication velocity across the Series 90-30 rack chassis, maintaining synchronous data transfer cycles with adjacent input/output modules. Integrated communication firmware flash compatibility enables immediate execution of Ethernet Global Data (EGD), SRTP, and Modbus TCP protocols without requiring a dedicated external coprocessor module. High I/O density scaling allows control architecture expansion across up to 7 remote baseplates, providing deterministic scan cycle resolution across large-scale distributed field layouts.
Frequently Asked Questions
Q: How does the IC693CPU363-DK preserve user program data and register values during an unpowered backplane state?
A: The module relies on a battery-backed internal RAM retention system coupled with Flash non-volatile memory to prevent register bit corruption or program loss during complete system power outages.
Q: Can the single-slot CPU module reside in any slot of a Series 90-30 baseplate?
A: No, the IC693CPU363-DK must install specifically into Slot 1 of the main Series 90-30 CPU baseplate to establish master control over the backplane bus and communicate with secondary expansion racks.
Field Installation Guidelines
Ensure backplane input power is fully isolated before seating the CPU module into Slot 1 of the primary Series 90-30 baseplate. Pivot the module bottom hook into the rack retention slot and push the top portion firmly inward until the latch mechanism engages fully. Connect the battery cable to the processor card connector to activate RAM retention circuits prior to powering on the system. Route Ethernet patch cables using shielded Category 5e lines, keeping communication cables at least 200 mm away from high-voltage AC lines to prevent inductive noise interference. Maintain dedicated single-point grounding on the baseplate ground bus to establish stable zero-volt references across the serial and Ethernet physical layers. Verify that ambient panel airflow prevents enclosure temperatures from exceeding 60 deg C during maximum load operations.