GE Fanuc IC693PWR324 Series 90-30 30W Power Supply Module
Manufacturer: GE Fanuc
-
Part Number: IC693PWR324
Condition：New with Original Package
Product Type: Power Supply Modules
-
Country of Origin: USA
Payment:T/T, Western Union
Shipping port: Xiamen
Warranty: 12 months
GE Fanuc IC693PWR324 Series 90-30 Power Supply Module
Configured for internal DC voltage regulation and serial communication execution in Series 90-30 backplane racks, the GE Fanuc IC693PWR324 (IC693PWR324 Power Supply Module) provides direct physical/electrical execution. This slot-mounted power distribution unit converts a 100-240 VAC or 125 VDC nominal primary supply into regulated +5 VDC, +12 VDC relay, and isolated +12 VDC internal power rails while making available an integrated RS-485 serial port.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | IC693PWR324 |
| Brand | GE Fanuc |
| Origin | USA |
| Weight | 0.86 lbs (0.39 kg) |
| Dimensions | Standard Series 90-30 Slot Size |
| Operating Temp | 0 to 60 deg C |
| Storage Temp | -40 to 85 deg C |
| Power Consumption | 50 W maximum input power (90 VA max) |
| Input Voltage | 100-240 VAC (47-63 Hz) or 125 VDC |
| Total Output Capacity | 30 W maximum total output |
| Output Voltages | +5 VDC (5.0-5.2 VDC, 30 W max), +12 VDC Relay (10.2-13.8 VDC, 5 W max), +12 VDC Isolated (10.2-13.8 VDC, 20 W max) |
| Inrush Current | 4 A maximum |
| Holdup Time | 20 ms minimum |
| Ripple / Noise | 50 mV peak-to-peak |
| Isolation Voltage | 1500 VAC |
| Serial Interface | Integrated RS-485 connector |
Brand-Specific Hardware Architecture
The backplane bus communication velocity depends directly on maintaining stable supply voltages to CPU microprocessors and digital I/O bus interface ICs. The power supply regulates internal logic levels within a tight 5.0-5.2 VDC window while filtering field-side power surges using 1500 VAC isolation transformers. Integrated overvoltage and short-circuit protection circuits immediately interrupt backplane power if voltage parameters drift, preventing thermal degradation across the backplane bus logic structure.
Frequently Asked Questions
Q: Can the IC693PWR324 power supply be installed in any slot on a Series 90-30 baseplate?
A: No, field technicians must install the IC693PWR324 exclusively in the dedicated left-most power supply slot (slot 0) on the Series 90-30 baseplate to properly engage the internal backplane power buses.
Q: What is the functional limit when utilizing the integrated RS-485 serial port on the power supply front panel?
A: The RS-485 serial port provides physical connectivity for programming devices, operator interfaces, or serial network nodes using SNP/SNP-X protocols without requiring an auxiliary communications module.
Field Installation Guidelines
Mounting the IC693PWR324 requires inserting the rear tabs into the far-left slot of the Series 90-30 baseplate and pushing the module firmly into place until the bottom release lever locks tightly. Connect incoming primary power (100-240 VAC or 125 VDC) to the screw terminals on the front terminal strip under the protective cover.
Maintain a dedicated protective earth (PE) ground connection directly from the module grounding terminal to the main panel ground bar using a minimum 14 AWG conductor. Route AC input cables away from low-voltage I/O lines by maintaining a 6-inch physical separation in wire troughs to limit electromagnetic interference. Verify that external 24 VDC relay power loops do not exceed total wattage limits when drawing power from the isolated outputs.