GE Fanuc IC693PWR324Z Series 90-30 30W Power Supply Module
Manufacturer: GE Fanuc
-
Part Number: IC693PWR324Z
Condition：New with Original Package
Product Type: Power Supplies
-
Country of Origin: USA
Payment:T/T, Western Union
Shipping port: Xiamen
Warranty: 12 months
GE Fanuc IC693PWR324Z Series 90-30 Power Supply Module
The GE Fanuc IC693PWR324Z, also cataloged as the IC693PWR324 Power Supply Module, operates as a dedicated hardware component for primary system power conversion and distribution within Series 90-30 PLC platforms. Mounted exclusively in the leftmost slot of the baseplate rack, this unit converts incoming utility line power across 85 to 264 VAC or 100 to 300 VDC ranges into regulated internal output rails (+5 VDC, +24 VDC relay power, and isolated +24 VDC). These voltage buses energize the CPU, internal logic circuitry, I/O modules, and specialty expansion cards attached across the backplane bus.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | IC693PWR324Z |
| Brand | GE Fanuc |
| Origin | USA |
| Weight | 0.39 kg (0.86 lbs) |
| Dimensions | Standard Series 90-30 single-slot footprint |
| Operating Temp | 0 to 60 deg C (32 to 140 deg F) |
| Power Consumption | Total Output Capacity: 30 W max; Input Power: 90 VA / 50 W |
| Input Voltage Range | 85 to 264 VAC (47-63 Hz) or 100 to 300 VDC |
| Nominal Rated Voltage | 120/240 VAC or 125 VDC nominal |
| Output Voltage Rails | +5 VDC (system logic), +24 VDC Relay, Isolated +24 VDC |
| Isolation Voltage | 1500 VAC |
| Serial Port Interface | Integrated RS-485 serial port |
Backplane Power Distribution & System Isolation
The IC693PWR324Z maintains stable backplane bus communication velocity and system execution by delivering regulated DC voltage rails with ripple levels under 50 mV. Internal power conversion circuits feature 1500 VAC galvanic isolation between AC line inputs and internal system logic, preventing field-side line transients from propagating to sensitive microprocessors. Integrated overcurrent electronic fused protection and overvoltage clamping limits secure the 30 W power budget, supporting firmware flash compatibility and deterministic execution across fully populated Series 90-30 rack structures.
Frequently Asked Questions
Q: In which slot position must the IC693PWR324Z power supply be installed?
A: The IC693PWR324Z must be installed exclusively in the unnumbered, leftmost power supply slot of the Series 90-30 baseplate. Installing it in standard I/O slots prevents physical connection to the primary backplane power distribution traces.
Q: What protective measures prevent damage during input overcurrent conditions?
A: The module incorporates an internal fuse for overcurrent protection alongside electronic overvoltage limiting to protect downstream backplane components against input power surges.
Q: Can the IC693PWR324Z operate on direct current (DC) input power?
A: Yes, the power supply accepts DC input voltages ranging from 100 to 300 VDC (125 VDC nominal) in addition to standard AC input power.
Field Installation Guidelines
- Input Power Isolation: Disconnect main line AC or DC power feeders before attempting to connect conductors to the input screw terminals or removing the power supply unit from the baseplate.
- Grounding Requirements: Secure a low-impedance ground conductor from the frame ground terminal directly to the central panel earth ground bar to ensure proper noise filtering and surge suppression performance.
- RS-485 Port Wiring: When utilizing the integrated RS-485 serial communication port, install shielded twisted-pair cabling and ground the shield at a single termination point to prevent ground loops.